download - Knoll

Brackets
panel planning
end support and VDT brackets
Morrison
description type w d h pattern no. paint
VDT end support bracket kits-V with wood
screws (includes 2 VDT end brackets and 1
stabilizer bracket)
36D VDT worksurface 36 3
/8 1 1 /4 MB3-V36W-( ) $130.
42D VDT worksurface 42 3
/8 1 1 /4 MB3-V42W-( ) 137.
48D VDT worksurface 48 3
/8 1 1 /4 MB3-V48W-( ) 150.
Worksurface Planning
Order Code
Specification Information
Application Notes
Example: MB3-E30-M-612
MB3 Bracket
E Bracket type
30 Bracket depth
M Machine screws
612 Paint finish
Bracket type:
E- End support
V- VDT corner end support
C- Cantilever
Specify paint finish.
E-type end support brackets support
1 1 /4 or 1 3 /4 worksurface from
connector tracks at both back and
front.
EV- bracket supports one back edge
of VDT or curvilinear corner surface
when other side is desk-supported.
V-type end support bracket kits
support both back edges of 90°
VDT corner worksurfaces.
V-kits include two end support and
one AUX-V.
Brackets with machine screws
(suffix-M) are used with MW2- and
MU1- worksurfaces.
Brackets with wood screws
(suffix-W) are used with LU1- and
AWM2- worksurfaces.
*MB3-EC18-( ), MB3-EC24-( ),
and MB3-EC30-( ) end support
brackets should be specified when
supporting worksurfaces from 30
high panels or for supporting
Currents work-surfaces for Morrison
from all panel heights.
155