download - Knoll

Power distribution components
3+3 Raceway
six circuit, ten-wire raceway for desk supports
infeeds, outlets and cable sleeves
Morrison
description type pattern no. list price
Power infeeds Desk support infeed MR3-NTPI $268.
Hardwire infeed (NYC) MR3-NTPNY( ) 366.
Panel/desk connector MR3-NTPD 366.
Duplex outlets, black Circuit A MR3-DA 39.
Circuit B MR3-DB 39.
Circuit C MR3-DC 39.
Circuit X MR3-DX 39.
Circuit Y MR3-DY 39.
Circuit Z MR3-DZ 39.
Duplex outlets, orange Circuit X MR3-DXO 46.
Circuit Y MR3-DYO 46.
Circuit Z MR3-DZO 46.
Duplex outlets, black with orange triangle Circuit X MR3-DXT 46.
Circuit Y MR3-DYT 46.
Circuit Z MR3-DZT 46.
Order Code
Example: MR3-NTPI
MR3 Morrison raceway
N Network desk support
T Tenwire3+3
PI Power infeed
Specification Information
Morrison3+3Raceway is a
four-circuit, eight-wire modular
power distribution system, for use in
Morrison panels and Network desk
supports.3+3Raceway
components distribute three 20-amp
convenience circuits (A, B, C), with
neutral and ground, and three
protected 20-amp circuits (X, Y, Z)
with separate neutral and ground.
Duplex outlet circuits are
designated by white letters on black
background, or black letters on
orange background.
Specify paint finishes for hardwire
infeed kit.
172
Application Notes
Power infeeds connect building
power supply to a cluster of
interconnected power rails. Desk
support infeed snaps into the end of
any desk power rail, and includes 6
foot liquid-tight conduit and pigtail
for connection to floor or wall
electrical box. Panel/desk connector
transmits power between the end of
a desk support rail and any panel
base power rail outlet position.
Hardwire infeed, used in all New
York City installations, includes
junction box that mounts to the
inside of a desk support corner leg.
Electrical contractor supplies
conduit from building power supply
to box and trims power connector to
length. Hardwire kit includes
painted finish cover panel.
Duplex outlets are preconfigured to
access one of the six circuits, A, B,
C, X, Y, Z, and snap into any
standard outlet location. Duplexes
on circuits X, Y, Z may be specified
with orange face or black face with
orange triangle to signify protected
circuits for electronic equipment; all
other duplexes are black.
Grommet outlet module stands in
any Morrison (not Options)
worksurface grommet for convenient
access. Grommet outlet module
accepts only special duplexes
(MR1-DA or MR1-DB) on circuits A
or B.
Contact protectors enclose open
conductors on power rail wherever
outlets or power connectors are not
planned.
Cable sleeves contain and protect
power and data cables passing
between desk supports.