download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Worksurfaces, 1 3 /4<br />
30D<br />
Morrison<br />
description type w d h pattern no. lam. V1 V2<br />
Straight, 30D Grommets 30 29 5 /8 1 3 /4 MW2-S3030-A-( ) $507. $705. $986.<br />
36 29 5 /8 1 3 /4 MW2-S3630-A-( ) 561. 757. 1,058.<br />
42 29 5 /8 1 3 /4 MW2-S4230-A-( ) 594. 810. 1,127.<br />
48 29 5 /8 1 3 /4 MW2-S4830-A-( ) 646. 879. 1,216.<br />
54 29 5 /8 1 3 /4 MW2-S5430-A-( ) 679. 949. 1,284.<br />
60 29 5 /8 1 3 /4 MW2-S6030-A-( ) 717. 1,003. 1,397.<br />
66 29 5 /8 1 3 /4 MW2-S6630-A-( ) 771. 1,073. 1,520.<br />
72 29 5 /8 1 3 /4 MW2-S7230-A-( ) 856. 1,178. 1,645.<br />
78 29 5 /8 1 3 /4 MW2-S7830-A-( ) 926. 1,284. 1,787.<br />
84 29 5 /8 1 3 /4 MW2-S8430-A-( ) 995. 1,389. 1,950.<br />
90 29 5 /8 1 3 /4 MW2-S9030-A-( ) 1,084. 1,526. 2,164.<br />
96 29 5 /8 1 3 /4 MW2-S9630-A-( ) 1,186. 1,668. 2,376.<br />
Straight 30D - no grommets No grommets 30 29 5 /8 1 3 /4 MW2-S3030-B-( ) 436. 633. 915.<br />
36 29 5 /8 1 3 /4 MW2-S3630-B-( ) 488. 685. 985.<br />
42 29 5 /8 1 3 /4 MW2-S4230-B-( ) 520. 733. 1,057.<br />
48 29 5 /8 1 3 /4 MW2-S4830-B-( ) 574. 804. 1,144.<br />
54 29 5 /8 1 3 /4 MW2-S5430-B-( ) 608. 878. 1,213.<br />
60 29 5 /8 1 3 /4 MW2-S6030-B-( ) 643. 929. 1,323.<br />
66 29 5 /8 1 3 /4 MW2-S6630-B-( ) 698. 1,001. 1,448.<br />
72 29 5 /8 1 3 /4 MW2-S7230-B-( ) 782. 1,104. 1,575.<br />
78 29 5 /8 1 3 /4 MW2-S7830-B-( ) 853. 1,213. 1,714.<br />
84 29 5 /8 1 3 /4 MW2-S8430-B-( ) 923. 1,315. 1,876.<br />
90 29 5 /8 1 3 /4 MW2-S9030-B-( ) 1,009. 1,453. 2,093.<br />
96 29 5 /8 1 3 /4 MW2-S9630-B-( ) 1,109. 1,592. 2,306.<br />
Worksurface Planning<br />
Order Code<br />
Example: MW2-S4230A-117<br />
MW2 Worksurface, 1 3 /4 thick<br />
S Straight worksurface<br />
42 Width<br />
30 Depth<br />
A Grommets<br />
117 Surface finish<br />
Specification Information<br />
Grommets/no grommets:<br />
A- worksurface includes 3<br />
grommet in each back<br />
corner leading into desk<br />
support or wire manager<br />
clips.<br />
B- worksurface does not include<br />
grommets<br />
Specify surface finish.<br />
All worksurfaces are U.L.-listed.<br />
105<br />
Application Notes<br />
30D worksurfaces are used<br />
interchangeably in desk and panel<br />
system applications as main<br />
surfaces, extensions or credenza<br />
tops. They must be supported at<br />
each end by a pedestal, end panel,<br />
end support cantilever or cantilever<br />
bridging bracket with a maximum<br />
span of 60 between supports.<br />
All straight worksurfaces are 3 /8 less<br />
than nominal depth for rear wire<br />
clearance or privacy screens.<br />
MW2- worksurfaces are supported<br />
by brackets with machine screws.<br />
Panel supported worksurfaces over<br />
60 must be mid-span supported by<br />
MB2-C18 bracket, specified<br />
separately.<br />
Plastic laminate worksurfaces are<br />
post-formed top and bottom, front<br />
and back.
Change language