download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Worksurfaces, 1 1 /4<br />
30D<br />
Morrison<br />
description w d h pattern no. lam. V1 V2<br />
Straight, 30D - Grommets 30 29 5 /8 1 1 /4 MU1-S3030-A-( ) $405. $588. $848.<br />
36 29 5 /8 1 1 /4 MU1-S3630-A-( ) 436. 624. 899.<br />
42 29 5 /8 1 1 /4 MU1-S4230-A-( ) 471. 674. 966.<br />
48 29 5 /8 1 1 /4 MU1-S4830-A-( ) 502. 721. 1,034.<br />
54 29 5 /8 1 1 /4 MU1-S5430-A-( ) 536. 788. 1,118.<br />
60 29 5 /8 1 1 /4 MU1-S6030-A-( ) 568. 842. 1,201.<br />
66 29 5 /8 1 1 /4 MU1-S6630-A-( ) 600. 890. 1,303.<br />
72 29 5 /8 1 1 /4 MU1-S7230-A-( ) 666. 974. 1,404.<br />
78 29 5 /8 1 1 /4 MU1-S7830-A-( ) 720. 1,056. 1,546.<br />
84 29 5 /8 1 1 /4 MU1-S8430-A-( ) 777. 1,137. 1,671.<br />
90 29 5 /8 1 1 /4 MU1-S9030-A-( ) 821. 1,208. 1,779.<br />
96 29 5 /8 1 1 /4 MU1-S9630-A-( ) 892. 1,314. 1,935.<br />
Straight, 30D - No grommets 30 29 5 /8 1 1 /4 MU1-S3030-B-( ) 334. 516. 778.<br />
36 29 5 /8 1 1 /4 MU1-S3630-B-( ) 365. 552. 830.<br />
42 29 5 /8 1 1 /4 MU1-S4230-B-( ) 399. 602. 895.<br />
48 29 5 /8 1 1 /4 MU1-S4830-B-( ) 431. 652. 964.<br />
54 29 5 /8 1 1 /4 MU1-S5430-B-( ) 462. 717. 1,049.<br />
60 29 5 /8 1 1 /4 MU1-S6030-B-( ) 496. 771. 1,132.<br />
66 29 5 /8 1 1 /4 MU1-S6630-B-( ) 528. 816. 1,232.<br />
72 29 5 /8 1 1 /4 MU1-S7230-B-( ) 594. 902. 1,332.<br />
78 29 5 /8 1 1 /4 MU1-S7830-B-( ) 646. 984. 1,474.<br />
84 29 5 /8 1 1 /4 MU1-S8430-B-( ) 702. 1,065. 1,597.<br />
90 29 5 /8 1 1 /4 MU1-S9030-B-( ) 752. 1,139. 1,708.<br />
96 29 5 /8 1 1 /4 MU1-S9630-B-( ) 819. 1,242. 1,864.<br />
Worksurface Planning<br />
Order Code<br />
Specification Information<br />
Application Notes<br />
Example: MU1-S3030B-117<br />
MU1 Worksurface, 1 1 /4 thick<br />
S Straight worksurface<br />
30 Width<br />
30 Depth<br />
B No grommets<br />
117 Surface finish<br />
Grommets/no grommets:<br />
A- worksurface includes 3<br />
grommet in each back<br />
corner leading into desk<br />
support or wire manager<br />
clips.<br />
B- worksurface does not include<br />
grommets<br />
Specify surface finish.<br />
1 1 /4 worksurfaces are 3-ply, solid<br />
core construction with threaded<br />
metal inserts at all end panel, desk<br />
support and bracket locations and<br />
pilot holes at pedestal locations.<br />
All worksurfaces are U.L.-listed.<br />
MU1- worksurfaces are supported<br />
by brackets with machine screws.<br />
Plastic laminate worksurfaces are<br />
post-formed top and bottom, front<br />
and back.<br />
30D worksurfaces are used<br />
interchangeably in desk and panel<br />
system applications as main<br />
surfaces, extensions or credenza<br />
tops. They can be supported at each<br />
end by 30 end support bracket, 30<br />
cantilever bracket, 30 flat bracket,<br />
30W end panel, 24D pedestal or<br />
end panel in conjunction with desk<br />
support, or 30D pedestal.<br />
All straight worksurfaces are 3 /8 less<br />
than nominal depth for rear wire<br />
clearance or privacy screens.<br />
Panel-supported 1 1 /4 worksurfaces<br />
over 48 must be mid-span<br />
supported by MB2-C18 bracket,<br />
specified separately.<br />
Worksurfaces with grommets are<br />
bored to accept and are shipped<br />
with wire manager clips.<br />
Suspended pedestals may not be<br />
used with 1 1 /4 worksurfaces.<br />
113
Change language