download - Knoll
download - Knoll
download - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Worksurfaces, 1 3 /4<br />
VDT corners<br />
Morrison<br />
description type w d h pattern no. lam. V1 V2<br />
Corner Corner grommet only 35 5 /8 17 5 /8 1 3 /4 MW2-V3618-A-( ) $893. $1,119. $1,579.<br />
Corner grommet only 35 5 /8 23 5 /8 1 3 /4 MW2-V3624-A-( ) 929. 1,135. 1,616.<br />
Corner grommet only 41 5 /8 23 5 /8 1 3 /4 MW2-V4224-A-( ) 961. 1,189. 1,684.<br />
Corner grommet only 41 5 /8 29 5 /8 1 3 /4 MW2-V4230-A-( ) 1,017. 1,258. 1,787.<br />
Corner grommet only 47 5 /8 23 5 /8 1 3 /4 MW2-V4824-A-( ) 1,136. 1,358. 1,984.<br />
Corner grommet only 47 5 /8 29 5 /8 1 3 /4 MW2-V4830-A-( ) 1,190. 1,463. 2,087.<br />
Corner - 3 grommets 3 grommets 35 5 /8 23 5 /8 1 3 /4 MW2-V3624-C-( ) 1,003. 1,210. 1,685.<br />
41 5 /8 23 5 /8 1 3 /4 MW2-V4224-C-( ) 1,035. 1,261. 1,759.<br />
41 5 /8 29 5 /8 1 3 /4 MW2-V4230-C-( ) 1,089. 1,329. 1,862.<br />
47 5 /8 23 5 /8 1 3 /4 MW2-V4824-C-( ) 1,207. 1,432. 2,054.<br />
47 5 /8 29 5 /8 1 3 /4 MW2-V4830-C-( ) 1,264. 1,538. 2,160.<br />
Worksurface Planning<br />
Order Code<br />
Example: MW2-V4830-C-117<br />
MW2 Worksurface, 1 3 /4 thick<br />
V VDT corner<br />
48 Width<br />
30 Depth of return<br />
C Three grommets<br />
117 Surface finish<br />
Specification Information<br />
Grommets/no grommets:<br />
A- VDT corner includes 3<br />
grommet in back corner.<br />
C- VDT corner includes 3<br />
grommet in all three back<br />
corners.<br />
Specify surface finish.<br />
VDT worksurfaces have threaded<br />
metal inserts at all desk support and<br />
bracket locations.<br />
MW2- worksurfaces are supported<br />
by brackets with machine screws.<br />
All worksurfaces are U.L.-listed.<br />
107<br />
All VDT corner worksurfaces are<br />
bored to accept and are shipped<br />
with wire manager clips.<br />
Application Notes<br />
VDT corners may be used<br />
interchangeably in desk and panel<br />
system applications. They must be<br />
supported by VDT support brackets<br />
on each back edge or cantilever<br />
bridging brackets on each side edge<br />
and a cantilever bracket on the back<br />
corner.<br />
36Wx18D VDT corners accept<br />
18D returns, 36,42, and 48Wx<br />
24D VDT corners accept 24D<br />
returns, 42 and 48Wx30D VDT<br />
corners accept 30D returns.<br />
VDT corners are 3 /8 less than<br />
nominal depth for rear wire<br />
clearance or privacy screens.<br />
Plastic laminate worksurfaces are<br />
post-formed on front and back<br />
edges. 48 x24 VDT corners have<br />
an inside radius, T-mold front edge<br />
that curves into an optimal 45°<br />
straight keyboard location.
Change language