download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Morrison Options worksurfaces, 1 1 /4<br />
120° corners<br />
Meeting corner<br />
Morrison<br />
description w return h pattern no. paint lam. V1 V2<br />
Meeting corner<br />
Right hand - no grommet<br />
48 24 1 1 /4 LU1-M48S-BRL( ) $729. n/a n/a<br />
Meeting corner<br />
Left hand - no grommet<br />
48 24 1 1 /4 LU1-M48S-BLL( ) 729. n/a n/a<br />
Support column 5 27 MM2-L26( ) 170.<br />
Worksurface Planning<br />
Order Code<br />
Specification Information<br />
Application Notes<br />
Example: LU1-M48S-B-L-L-117<br />
LU1 Options worksurface,<br />
1 1 /4 thick<br />
M Meeting corner<br />
48 Width<br />
S 24D return<br />
B No Grommets<br />
L Left hand<br />
L Laminate<br />
117 Surface finish<br />
Width dimension (w) refers to width<br />
of smaller back edge. Total width of<br />
back edge with rounded meeting<br />
area is 62 1 /2.<br />
Specify surface finish.<br />
1 1 /4 worksurfaces are solid core<br />
construction with pilot holes at all<br />
support locations.<br />
120° Options worksurfaces are<br />
available without grommets only.<br />
LU1- worksurfaces are supported by<br />
brackets with wood screws.<br />
Worksurfaces are 3 /8 less than<br />
nominal depth for rear wire<br />
clearance or privacy screens.<br />
Morrison Options 120° meeting<br />
worksurfaces are used in panel<br />
system application only. They are<br />
supported at the rounded meeting<br />
end by a Morrison support column,<br />
specified separately. They can be<br />
supported at the other end by 24<br />
end support brackets, 24 cantilever<br />
bracket or 18D and 24D<br />
pedestals.<br />
120° corner is supported by 24D<br />
cantilever bracket.<br />
Use 24D cantilever bridging<br />
brackets to join to adjacent<br />
worksurfaces.<br />
135