download - Knoll
download - Knoll
download - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Morrison Access<br />
top cap raceway<br />
Morrison<br />
description type w d h pattern no. black<br />
Top Cap Raceway Panels 6 2 1 /4 1 MA1-TC6 $34.<br />
18 2 1 /4 1 MA1-TC18 37.<br />
24 2 1 /4 1 MA1-TC24 41.<br />
30 2 1 /4 1 MA1-TC30 48.<br />
36 2 1 /4 1 MA1-TC36 57.<br />
42 2 1 /4 1 MA1-TC42 64.<br />
48 2 1 /4 1 MA1-TC48 75.<br />
60 2 1 /4 1 MA1-TC60 94.<br />
Top cap raceway connectors Corner MA1-TCL 7.<br />
End MA1-TCE 7.<br />
End post MA1-TCP 7.<br />
Straight post MA1-TCS 7.<br />
T MA1-TCT 7.<br />
Panel Planning<br />
Order Code<br />
Specification Information<br />
Application Notes<br />
Example: MA1-TC42<br />
MA1 Morrison Access<br />
TC Top Cap Raceway<br />
42 Width<br />
Top Cap Raceway for panels is<br />
black anodized aluminum.<br />
Connectors are black color-integral<br />
molded plastic.<br />
Top Cap Raceway snaps onto top of<br />
vertical panel to provide horizontal<br />
cable channel.<br />
Top Cap Raceway accepts standard<br />
panel top caps.<br />
With top caps removed,<br />
unobstructed, lay-in cable capacity<br />
is approximately thirty three 4-pair<br />
UTP cables ( 3 /16 diameter).<br />
Cross-section area is 1 1/2 square<br />
inches.<br />
Top Cap Raceway connectors<br />
provide full cable enclosure above<br />
any panel connection. No connector<br />
is required above X posts. Top cap<br />
raceway connectors may also be<br />
used with Highway (see page 75) for<br />
full cable enclosure over L or T<br />
connections.<br />
When Top Cap Raceway is planned<br />
only on the center spine of a cluster<br />
specify straight post top cap<br />
raceway connectors at T and X<br />
connections; specify end post<br />
connector at corner or T at end of<br />
spine. Specify straight post or end<br />
post top caps separately (see pages<br />
79-80).<br />
Specify Vertical Raceway (see page<br />
76) to distribute cables from top cap<br />
raceway to worksurface height or<br />
panel base raceway. Cables also<br />
may pass from Top Cap Raceway to<br />
panel base raceway in L, T, or X<br />
connector post (six 25-pair cables).<br />
Top Cap Raceway does not accept<br />
power components.<br />
77