download - Knoll

Worksurfaces, 1 1 /4
18D
Morrison
description type w d h pattern no. lam. V1 V2
Straight, 18D No grommets 30 17 5 /8 1 1 /4 MU1-S3018-B-( ) $268. $417. $608.
36 17 5 /8 1 1 /4 MU1-S3618-B-( ) 297. 449. 656.
42 17 5 /8 1 1 /4 MU1-S4218-B-( ) 311. 485. 723.
48 17 5 /8 1 1 /4 MU1-S4818-B-( ) 365. 536. 793.
54 17 5 /8 1 1 /4 MU1-S5418-B-( ) 380. 568. 844.
60 17 5 /8 1 1 /4 MU1-S6018-B-( ) 399. 602. 914.
66 17 5 /8 1 1 /4 MU1-S6618-B-( ) 431. 670. 1,011.
72 17 5 /8 1 1 /4 MU1-S7218-B-( ) 480. 751. 1,115.
Worksurface Planning
Order Code
Example: MU1-S4818-B-117
MU1 Worksurface 1 1 /4 thick
S Worksurface type
48 Width
18 Depth
B No grommets
117 Surface finish
Specification Information
B: Worksurface does not include
grommets.
Specify surface finish.
1 1 /4 worksurfaces are 3-ply, solid
core construction with threaded
metal inserts at all end panel, desk
support and bracket locations and
pilot holes at pedestal locations.
All worksurfaces are U.L.-listed.
MU1- worksurfaces are supported
by brackets with machine screws.
111
Application Notes
18D worksurfaces are used
interchangeably in desk and panel
system applications as shallow main
surfaces, extensions, or credenza
tops. They may be supported at each
end by an 18 ‘‘ end support bracket,
18 cantilever bracket, 18W
conference end panel, 18D
pedestal, or 12W end panel
(MN2-E12) in conjunction with a
desk support.
18D worksurfaces with desk
supports do not accept pedestals.
All worksurfaces are 3 /8 less than
nominal depth for rear wire
clearance or privacy screens.
Panel-supported 1 1 /4 worksurfaces
over 48 must be mid-span
supported by MB2-C18 bracket,
specified separately.
Suspended pedestals may not be
used with 1 1 /4 worksurfaces.