download - Knoll

Morrison Network Desk System
desk end and filler panels
Morrison
description type w d h pattern no. list price
End panel for desk support 6 1 1 /4 26 MN2-E06-( ) $276.
7 1 /2 1 1 /4 26 MN2-E09-( ) 291.
18d 10 1 /2 1 1 /4 26 MN2-E12-( ) 308.
24d 16 1 /2 1 1 /4 26 MN2-E18-( ) 359.
30d 22 1 /2 1 1 /4 26 MN2-E24-( ) 397.
Transitional support panel Stanchion adapter kit – – – MN2-RSAK 15.
Support panel 6 1 26 MN2-RDR( ) 279.
Return support adapter 6 1 1 /4 26 MN2-RER-( ) 155.
End panel wireway 18d 18 1 1 /2 8 MN2-EW18-( ) 155.
24d 24 1 1 /2 8 MN2-EW24-( ) 171.
Worksurface Planning
Order Code
Example: MN2-E24-612
MN2 Morrison Network
E End panel
24 Depth
612 Finish
Specification Information
Specify desk end and filler panels to
correspond with desk depth and
width. End panels are nominally 6
less deep than desk to accommodate
desk support. Actual filler panels
are 12 less wide than desk, to fit
between desk support corner legs.
Return support adapter attaches to
front edge of end panel. Specify
return support in same nominal
width as return worksurface.
Specify painted finishes for end
panels, filler panels and accessories.
161
Application Notes
Desk end panels are used to support
an end of a freestanding desk
without pedestal support. Integral
brackets permit application on left
or right end of desk.
For desk planning applications with
full end panel and desk support:
Use MN2-E12 with 18D
worksurface
Use MN2-E18 with 24D
worksurface
Use MN2-E24 with 30D
worksurface
For 24D VDT desks with
extensions, specify MN2-E06 end
panel and single bridging bracket.
For 30D VDT, specify MN2-E12
end panel and single bridging
bracket.
For support of one end of 24D
return with desk support adjacent to
freestanding Interaction corner
table, specify MN2-E09.
Desk end panels do not permit
adjacent pedestal attachment.
Transitional support panel secures a
return desk support to Morrison
vertical panel connector track in
integrated desk and panel planning.
Transitional panel also acts as a leg
or pedestal extender to stabilize
vertical panels supporting overhead
storage.
Use MN2-RDR to stabilize each
side of vertical panel at half-round
conference worksurface.
Transitional panel includes one
grommet.
Return support adapter is specified
when adding a return worksurface to
a desk with end panel. Adapter
extends from end panel to return
support. End panel wireway
attaches to inside of end panel to
link desk support wireway to return
support.
Filler panels provide full enclosure
for desk supports, filling the
kneehole space between corner legs.
They are specified in addition to
corresponding desk supports.