download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Morrison Options worksurfaces, 1 1 /4<br />
120° corners<br />
90° returns and Diamond<br />
Morrison<br />
description type w return h pattern no. lam. V1 V2<br />
90° return no grommet 36 24 1 1 /4 LU1-Y36S-B( )( ) $604. $850. $1,033.<br />
42 24 1 1 /4 LU1-Y42S-B( )( ) 638. 1,033. 1,361.<br />
48 24 1 1 /4 LU1-Y48S-B( )( ) 707. 1,132. 1,705.<br />
60 24 1 1 /4 LU1-Y60S-B( )( ) 863. n/a n/a<br />
Diamond no grommet 36 24 1 1 /4 LU1-D36S-B( )( ) 596. 860. 1,063.<br />
42 24 1 1 /4 LU1-D42S-B( )( ) 662. 1,052. 1,418.<br />
48 24 1 1 /4 LU1-D48S-B( )( ) 724. 1,177. 1,785.<br />
Transitional 24 1 1 /4 LU1-YTS-( )( ) 464. 608. 791.<br />
Order Code<br />
Example: LU1-Y48S-B-L-L-117<br />
LU1 Options worksurface,<br />
1 1 /4 thick<br />
Y 120° corner,90° returns<br />
48 Width<br />
S 24D return<br />
B No Grommets<br />
L Left hand<br />
L Laminate<br />
117 Surface finish<br />
Specification Information<br />
Width dimensions (w) refers to<br />
width of both back edges.<br />
Specify surface finish.<br />
1 1 /4 Options worksurfaces are solid<br />
core construction with pilot holes at<br />
standard support locations.<br />
120° Options worksurfaces are<br />
available without grommets only.<br />
LU1- worksurfaces are supported by<br />
brackets with wood screws.<br />
134<br />
Application Notes<br />
Worksurfaces are 3 /8 less than<br />
nominal depth for rear wire<br />
clearance.<br />
120° Morrison Options<br />
worksurfaces with 90° returns are<br />
used in panel system applications<br />
only. They can be supported at each<br />
end by 24 end support brackets,<br />
24 cantilever bracket or 18D and<br />
24D pedestals. 120° corner is<br />
supported by a standard ( 90° )<br />
24D cantilever bracket.<br />
Use cantilever bridging brackets to<br />
join to adjacent worksurfaces or to<br />
transitional 120° worksurfaces. Use<br />
mid-span support whenever Options<br />
worksurfaces span more then 48.<br />
Transitional worksurfaces connect<br />
two 120° corner tops with 90°<br />
returns.<br />
120° Morrison Options<br />
worksurfaces with 120° returns are<br />
used in panel system applications<br />
only. They can be supported at each<br />
return end by 24 end support<br />
brackets, 24 cantilever bracket or<br />
18D and 24D pedestals. 120°<br />
corner is supported by standard (<br />
90°)24D cantilever bracket.<br />
Order brackets with wood screws for<br />
Morrison Options worksurfaces.<br />
Corner worksurfaces have diagonal<br />
grain direction.