download - Knoll

Worksurfaces, 1 1 /4
J-shape surfaces
Morrison
description w d h pattern no. paint lam.
J-shape - Rounded left 30 23 5 /8 1 1 /4 MU1-J30A( )L $667.
36 23 5 /8 1 1 /4 MU1-J36A( )L 718.
42 23 5 /8 1 1 /4 MU1-J42A( )L 763.
48 23 5 /8 1 1 /4 MU1-J48A( )L 810.
J-shape - Rounded right 30 23 5 /8 1 1 /4 MU1-J30A( )R 667.
36 23 5 /8 1 1 /4 MU1-J36A( )R 718.
42 23 5 /8 1 1 /4 MU1-J42A( )R 763.
48 23 5 /8 1 1 /4 MU1-J48A( )R 810.
Order Code
Example: MU1-J48A117-L
MU1 Worksurface, 1 1 /4
J J-shape
48 Width
A With grommets
117 Surface finish
L Left
Specification Information
1 1 /4 curvilinear surfaces are solid
core construction with threaded
metal inserts at desk support and all
bracket locations and pilot holes at
pedestal locations.
MU1- worksurfaces are supported
by brackets with machine screws.
Specify surface finish.
All worksurfaces are U.L.-listed.
J-shape worksurfaces have 2
grommets for use with freestanding
desk and overhead supports.
122
Application Notes
J-shape curvilinear worksurfaces
may be used interchangeably in
desk and panel system applications.
They may be supported by straight
desk support or cantilever brackets.
J-shapes also require 9 Network
end panel in desk or panel
planning.
Use flat bracket or bridging bracket
to join to adjacent 1 1 /4 worksurface.
Also specify VDT end support
bracket kit for optimal stability of
vertical panel behind J-shape
worksurface.
J-shape surfaces are post-formed on
back edge, matching profile T-mold
on curvilinear front, and self-edge
on sides.
J-shapes are available only in
plastic laminate, 1 1 /4 thickness.
J-shape surfaces are 3 /8 less than
nominal depth for wire clearance or
privacy screens.