download - Knoll
download - Knoll
download - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Morrison Options worksurfaces, 1 1 /4<br />
trapezoidal<br />
Morrison<br />
description w d h pattern no. lam. V1 V2<br />
Right hand - grommet 48 30/24 1 1 /4 LU1-T48A-R-( ) $464. $661. $925.<br />
54 30/24 1 1 /4 LU1-T54A-R-( ) 590. 840. 1,175.<br />
60 30/24 1 1 /4 LU1-T60A-R-( ) 716. 1,018. 1,427.<br />
72 30/24 1 1 /4 LU1-T72A-R-( ) 842. 1,197. 1,674.<br />
Left hand - grommet 48 24/30 1 1 /4 LU1-T48A-L-( ) 464. 661. 925.<br />
54 24/30 1 1 /4 LU1-T54A-L-( ) 590. 840. 1,175.<br />
60 24/30 1 1 /4 LU1-T60A-L-( ) 716. 1,018. 1,427.<br />
72 24/30 1 1 /4 LU1-T72A-L-( ) 842. 1,197. 1,674.<br />
Right hand - no grommet 48 30/24 1 1 /4 LU1-T48B-R-( ) 440. 625. 873.<br />
54 30/24 1 1 /4 LU1-T54B-R-( ) 564. 804. 1,126.<br />
60 30/24 1 1 /4 LU1-T60B-R-( ) 690. 984. 1,373.<br />
72 30/24 1 1 /4 LU1-T72B-R-( ) 815. 1,159. 1,624.<br />
Left hand - no grommet 48 24/30 1 1 /4 LU1-T48B-L-( ) 440. 625. 873.<br />
54 24/30 1 1 /4 LU1-T54B-L-( ) 564. 804. 1,126.<br />
60 24/30 1 1 /4 LU1-T60B-L-( ) 690. 984. 1,373.<br />
72 24/30 1 1 /4 LU1-T72B-L-( ) 815. 1,159. 1,624.<br />
Worksurface Planning<br />
Order Code<br />
Example: LU1-T48B-R-117<br />
LU1 Worksurface, 1 1 /4 thick<br />
T Trapezoidal<br />
48 Width<br />
B No grommets<br />
R Right hand<br />
117 Surface finish<br />
Specification Information<br />
Grommets/ no grommets<br />
A- worksurface includes one<br />
edge grommet<br />
B- worksurface does not include<br />
grommets<br />
Specify surface finish.<br />
Edge grommets are centered at rear<br />
of worksurface.Right-and-Left and<br />
are defined by applying trapezoidal<br />
tops as returns from rectilinear<br />
worksurfaces.<br />
R- Right hand<br />
30 D Left, 24 D Right edge<br />
L- Left hand<br />
24 D Left, 30 D Right edge<br />
Application Notes<br />
1 1 /4 Options worksurfaces are 3-<br />
ply solid core construction with pilot<br />
holes at all pedestal, end panel and<br />
bracket locations.<br />
LU1- worksurfaces are supported by<br />
brackets with wood screws.<br />
Trapezoidal worksurfaces must be<br />
supported at each end by a pedestal,<br />
cantilever or cantilever bridging<br />
bracket with a maximum span of 48<br />
between supports. Panel-supported<br />
worksurfaces over 48 must be<br />
mid-span supported by MB2-C18<br />
brackets, specified separately.<br />
Options worksurfaces cannnot be<br />
used in conjunction with Network<br />
desk supports.<br />
All worksurfaces are 3 /8 less than<br />
nominal depth for rear wire<br />
clearance or privacy screens.<br />
129
Change language