download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Brackets<br />
panel planning<br />
desk end panel, pedestal extender, filler panel<br />
Morrison<br />
description type w d h pattern no. list price<br />
Desk end panel/vertical panel-N with machine screws – – – MB1-NM-(L/R)-( ) $75.<br />
with wood screws – – – MB1-NW-(L/R)-( ) 75.<br />
Pedestal extender-R shallow 24, desk ht. 1 6 26 MB2-RS2426-(L/R)-( ) 156.<br />
30, desk ht. 1 12 26 MB2-RS3026-(L/R-( ) 183.<br />
deep 30, desk ht. 1 6 26 MB2-RD3026-(L/R)-( ) 156.<br />
36, desk ht. 1 12 26 MB2-RD3626-(L/R)-( ) 183.<br />
Filler panel/vertical panel-FV Desk height MB1-FV26-(L/R)-( ) 62.<br />
Transitional filler panel/worksurface-W Desk height with machine screws MB1-W20M-(L/R)-( ) 75.<br />
Desk height with wood screws MB1-W20W-(L/R)-( ) 75.<br />
Order Code<br />
Example: MB2-RS2426-R-612<br />
MB2 Bracket<br />
R Pedestal extender<br />
S Pedestal depth<br />
24 Worksurface depth<br />
26 Bracket height<br />
R Right-hand<br />
612 Paint finish<br />
Specification Information<br />
Specify left or right end of return or<br />
bridge worksurface.<br />
Bracket type:<br />
N- Desk end panel/vertical<br />
panel<br />
RS- 18D pedestal extender<br />
RD- 24D pedestal extender<br />
FV- Filler panel/vertical panel<br />
W- Transitional filler/<br />
worksurface<br />
Specify paint finish.<br />
158<br />
Application Notes<br />
N-type desk end panel/vertical<br />
panel brackets ensure alignment<br />
and rigidity between worksurface,<br />
universal end panel or pedestal<br />
extender, and back panel.<br />
R-type pedestal extender brackets<br />
close the gap between a pedestal<br />
and a vertical panel. Pedestal<br />
extender brackets can receive an<br />
MB1-N bracket to secure to a<br />
vertical panel, or a kneehole filler<br />
panel. Description indicates<br />
application by worksurface<br />
depth/pedestal depth/pedestal<br />
height.<br />
W-type filler panel/worksurface<br />
brackets are used at the end of a<br />
transitional filler panel nearest to<br />
the vertical panel. The same bracket<br />
MB1-W20( )-(L/R) is used for both<br />
machine and desk height.<br />
FV-type filler panel/vertical panel<br />
brackets are used when a return or<br />
bridge filler panel is adjacent to a<br />
vertical panel end connector.<br />
Brackets with machine screws<br />
(suffix-M) are used with MW2- and<br />
MU1- worksurfaces.<br />
Brackets with wood screws<br />
(suffix-W) are used with LU1- and<br />
AWM2- worksurfaces.
Change language