download - Knoll

Rolling Door
Specifications
Dividends Horizon
Dividends Horizon rolling doors were
developed for clients desiring increased
privacy for focused work.
Rolling doors are available in 57, 64 and 78"
overall heights, and widths to accommodate
panel openings of 36 and 42 inches.
Planning
Rolling doors must be mounted to the end
of an equal height Dividends Horizon panel
or run of panels of equal or greater width.
Doors may not be mounted to Dividends
Horizon screens or universal posts.
Door jamb may be mounted directly to
DP7 series universal posts – specify jamb
to post attachment kit separately.
When fully open, the door will extend 2"
beyond the end of the panel end trim
on a panel of corresponding width.
Thresholds are included with door pattern
number, and are required in all installations.
The Dividends Horizon rolling door meets
ADA 5 lb pull test requirements when
used with the supplied threshold.
Specifying 57" and 64" Rolling Doors
57" and 64" rolling doors include:
• Rolling door
• Mounting brackets
• Door jamb (for door side opposite
to mounting brackets)
• Threshold
To complete the specification, specify an
end trim for the panel to which the door is
mounted, and a jamb-compatible top cap for
the panel to which the door jamb is attached.
Specifying 78" Rolling Doors
78" rolling doors include:
• Rolling door
• Header
• Mounting brackets,
• Door jamb (for door side opposite
to mounting brackets)
• Panel end trim
• Threshold
78" high doors include a header, with
vertical clearance of 76 1/2" from height
of finished floor. Specify a top cap for the
header separately. Extended length top caps
are recommended in this application.
No additional end trim is required
for 78" high doors, as it is included
in the door pattern number.
Construction
Rolling door and door jamb are constructed
of extruded aluminum, powder coated
in any Knoll Core paint finish. Threshold
is anodized extruded aluminum.
Door inserts are available in clear,
powder or bronze frosted glass.
Locks are optional, and engage
with door jamb. Standard KnollKey
system keying guidelines apply.
100