download - Knoll

Worksurface Specifications
Grain Direction Information
Dividends Horizon
Laminate Worksurface Grain Direction
The standard grain direction for wood
grain or brushed laminates for each
worksurface shape is shown below.
When wood grain or brushed laminates
are specified on Dividends Horizon corner
worksurfaces, a left, right or diagonal grain
direction option must be specified as shown
below. Insert the desired grain direction option
(L, R or D) after the laminate finish code. The
diagonal option is an upcharge. This option
applies only to corner worksurfaces with
the same dimension on each rear side.
Techwood Worksurface Grain Direction
The standard grain direction for Techwood worksurfaces
for each worksurface shape is shown below.
Techwood corner worksurfaces with the same dimension
on each rear side have a diagonal grain direction.
Laminate Worksurface Grain Direction
Techwood Worksurface Grain Direction
Right (R)
Right (R)
Left (L)
Left (L)
Diagonal (D)
Diagonal (D)
Worksurfaces
277