download - Knoll

Panel Specifications
Planning Guidelines
Dividends Horizon
Panel Run Supported by
Panels at Both Ends
both ends (see Formulas 2 and 3 below)
supported by matching height panels
(see Formulas 2 and 3 below)
Open Support Leg or C-Leg support
High Density Storage
If hanging more than one overhead component
vertically per panel side the following is required:
return panels on both ends of the panel
Panel Run Supported by Panels at Both Ends
Formulas for Depth Return
Max. 12'
Pedestal, Open Support Leg,
C-Leg support, or pedestal every 8'
Min.
see
formula
Formula 1
Max. 12' panel run
* 24" if mounting
overheads and worksurfaces
30"
or *
Formula 2
Max. 12' panel run
Max. 12'
Pedestal, Open Support Leg,
C-Leg support, or pedestal every 8'
Min.
see
formula
Formula 3
Max. 12' panel run
* 30" if mounting
overheads and worksurfaces
36"
or *
High Density Storage
Max. 4'
Return panel must be a minimum
of 36" wide when laminate tiles are
used along the spine panel run.
Min. 18"
13