download - Knoll

Base Raceway Electrical
3+1, 2+2 and 3+3 Systems
Specifications
Dividends Horizon
Power Connectors
Power connectors carry power from power
module to power module in adjacent panels.
Two versions are available:
12" power connectors connect adjacent
power modules in straight configurations
when no post connector is involved.
15" power connectors are used in
applications involving adjacent power
modules separated by post connectors.
Duplex Receptacles
Duplex receptacles provide access to
power along the base raceway.
Two duplex receptacles can be installed per
panel side in base raceways 24" and wider. 18"
wide panels cannot accept duplex receptacles.
Receptacles insert into terminal blocks
in outlet positions at either end of power
modules and attach with a single screw.
Duplexes are available in (3+1), (2+2) and
(3+3) systems. Each system engages a
different combination of circuit wiring within the
power module. For detailed wiring diagrams,
3+1, 2+2 and 3+3 Electrical Systems
Each electrical system is designed
for different usage.
The (2+2) electrical system is for areas
and 2 circuits for isolated power usage.
significant power usage and an isolated circuit.
The (3+3) electrical system is for areas
with significant power usage and a
need for multiple isolated circuits.
Base Power Infeeds
Base power infeeds route power
from the building’s electrical source
to the panel base raceway.
Power infeeds plug into any terminal block
position on panel power modules.
Power Connector
Power Connectors
Single Panel Power Jumpers
Power Connector, no post
Power Jumper
Duplex Receptacle
Base Infeed
Power
Connector,
with post
Power
Connector,
with post (2
required)
Power
Connector,
with post
Power Jumper,
with post
Multiple Panel Power Jumpers
Legend
Power Module
Power Jumper
Power Connector
Note: Power connectors or power jumpers
can only plug into power modules
Power
Connector,
with post (3
required)
Multiple Panel Power Jumper and Power Connector
180