download - Knoll

Corner Worksurfaces
Rectilinear and Split Top Corner
Specifications
Dividends Horizon
Rectilinear Corner Worksurfaces
Dividends Horizon rectilinear corner
worksurfaces are used in panel-hung
and freestanding applications.
Split Top Corner Worksurfaces
Split top corner worksurfaces allow for height
and angle adjustment on the front worksurface.
The depth of the front keyboard worksurface is
10 5 / 8". The front surface adjusts from a - 5 3 / 4"
below the worksurface to a + 7" above. The
mechanism has a tilt feature of ±10 degrees.
Included with the split top worksurface is the
back corner worksurface, the front corner
worksurface, the split top mechanism, one
rear corner panel-to-worksurface bracket and
two flat brackets for attachment to return
worksurfaces. Cantilevers must be ordered
separately and are specified to the size return
worksurface depth (i.e 24" cantilevers for 24"
deep return worksurfaces). Panel-mounted
C-leg or Open Leg worksurface supports
may be used in place of cantilevers.
Available Sizes
1 / 4"
Corner Worksurface Support
Corner worksurfaces must be supported
by cantilevers at each end and a panelto-worksurface
bracket at the rear corner.
Panel-mounted C-leg or Open Leg
worksurface supports may be used instead
of cantilevers for corner worksurface support.
Cantilevers and panel-mounted C-leg or
Open Leg supports are ordered separately.
Panel-to-worksurface bracket is included.
Corner Worksurface Applications
Corner worksurfaces attach to adjacent
worksurfaces with cantilevers and flat brackets.
Suggested applications are illustrated below.
Note: All dimensions are nominal except for
front edge dimension.
Note: Series 3 overdesk units are not
compatible with corner worksurfaces.
Rectilinear Corner Worksurface
Rectilinear and Split Top Corner Worksurface Sizes Available
36"
36"
18"
42"
42"
24"
48"
48" 24"
48"
48"
30"
42"
42"
24"
Rectilinear Split-Top Corner Worksurface
18"
36"
36"
24"
25 7 / 16"*
24"
16 15 / 16"*
24"
42"
42"
30"
25 1 / 2"*
24"
21 5 / 8"*
30"
48"
48"
24"
30"*
24"
33 15 / 16"*
30"
48"
48"
24"
25 1 / 2"*
30"
30"*
24"
48"
48"
24"
24"
42"
42" 30"
48"
48"
30"
24"
21 5 / 8"*
30"
Corner Worksurface Support
Corner Worksurface Applications
**
Panel-to-
Worksurface
Bracket
Cantilever
(Left)
Cantilever
(Right)
**
**
**
** Requires a return panel, panelmounted
C-leg or Open Leg support or
a pedestal with a panel-to-worksurface
bracket for support.
290