download - Knoll

Conference Tables
Specifications
Dividends Horizon
Dividends Horizon Conference Tables
Dividends Horizon conference tables are
designed with a scale and visual language
consistent with the full scope of Dividends
Horizon products. This design consistency
makes Dividends Horizon tables appropriate
for use in conference, meeting, private
office and open plan office applications.
Dividends Horizon conference tables are
available in racetrack, rectangular, or boat shape
and in all standard Dividends Horizon finishes.
Conference tables include a table top and base
assembly. A conference table base assembly
includes two Y legs, one center support T base,
and two horizontal stretchers that connect
the three bases. Top sizes up to 120 inches
are produced in one piece, while tops longer
than 120 inches are produced in two pieces.
Available Sizes
Width: 102- 144 inches
Depth: 36- 48 inches
Height: 28-1/2 inches
Construction
Worksurface:
laminate or 0.6mm thick veneer on
1-1/8 inch thick particle board core
2mm edgeband; Techwood tops have
a 3/16" thick Techwood edge
Base:
3/16 inch thick structural plate
Note: Dividends Horizon conference tables
are only available in Knoll Core paint, laminate,
and Techwood finishes. Legacy finishes
are not available. All paint finishes have the
Dividends Horizon textured paint finish; this
includes 613 Silver, which is a smooth paint
on all other Dividends Horizon products.
Note: Grain patterns on woodgrain laminate
and veneer tops will not match at the seam in
the middle of tables longer than 120 inches.
Rectangular Conference Table
Racetrack Conference Table
wing
Boat Shape Conference Table
334