download - Knoll

Pedestals
Dividends Floorstanding, Doublewide and Mobile
Specifications
Dividends Horizon
Floorstanding Pedestals
Dividends Series 1 floorstanding pedestals are
used to support worksurfaces in both panelwrap
and freestanding desk applications. No
cantilevers or other supports are required at the
end of the worksurface supported by a pedestal.
For panel-wrap applications, three depths
are available in order to mount beneath
18", 24" and 30" deep worksurfaces.
In floorstanding desks, pedestals can
either be specified ‘‘Preconfigured’’ with
floorstanding desks or ordered by component
for ‘‘Build-to-Spec’’ applications.
Two drawer configurations are available:
box/box/file and file/file. Pedestals can
be specified with or without locks.
Mobile Pedestals
Dividends Series 1 mobile pedestals provide
moveable storage within workstations
and tuck beneath worksurfaces when not
in use. Available drawer configurations
are box/box/file, box/file, and file/file.
Mobile pedestals roll on four cornermounted
swivel casters and one bottom
drawer-mounted caster for stability when
the lower drawer is in the open position.
The front corner casters are locking.
Mobile pedestals may be specified with an
optional handle allowing easy mobility. All mobile
pedestals include 13-gauge finished tops. All
other construction and drawer dimensions
are the same as freestanding pedestals.
Mobile pedestals measure 20 5 / 8" and
26 5 / 8" high, 15" wide and 18" or 24" deep.
All mobile pedestals include locks.
Front -to-back
(letter)
Combination
(letter/legal)
Side-to-side
(letter)
Available Sizes
Depths: 18", 24" and 30"
Width: 15"
Height: 20 5 / 8" and 26 7 / 8"
Doublewide Pedestals
The doublewide pedestal incorporates two
12" high drawers in a 30" width (18 3 / 4"
depth) and is intended for below worksurface
applications only. The doublewide’s design
allows for side-to-side letter or legal
filing and front-to-back letter filing.
Doublewide pedestal can be used below
19", 24", or 36" deep worksurfaces,
not 18" deep worksurfaces.
Available Size
Depth: 18 3 / 4" (floorstanding pedestal only)
Width: 30"
Height: 26 7 / 8
Construction
Floorstanding mobile and doublewide pedestals
match the aesthetics and dimensions of
Dividends Horizon panel components.
• Outer wrapper: 20-gauge seamless
steel wrapper, includes finished
back and full dust pan
• Inner frame: 20-gauge steel uprights and
16-gauge cross rails
• Drawer front: 20-gauge steel, gently radiused
(double wide front: 18-gauge)
• Drawer top cap trim: Color injected,
molded plastic
• Box drawer suspension (floorstanding ped
only): 3 / 4" extension, ball-bearing slides
• File drawer suspension: Full extension,
ball-bearing slides
• Drawer pulls: Color injected, molded plastic
• Leveling glides: 3 / 8" diameter steel stem with
1 1 / 2"of height adjustment (double wide ped:
5
/ 16" diameter steel stem with a 1 9 / 16" of
height adjustment
Internal Drawer Dimensions (DS1)
Box drawer
• Internal height: 4 5 / 16"
• Internal width: 12 9 / 16"
• I nternal depths: 18" = 15 15 / 16",
24" = 21 1 / 4", 30" = 27 1 / 4"
File drawer
• Internal height: 9 1 / 4"
• Internal width: 12 1 / 8"
• Internal depths: 18" = 15 15 / 16",
24" = 21 1 / 4", 30" = 27 1 / 4"
File drawer (doublewide ped)
• Internal height: 9 3 / 4"
• Internal width: 26 3 / 4"
• Internal depth: 15 3 / 4"
Locks
Pedestals can be ordered with or without
locks. When specified without locks, a
lock plug is included. An optional lock
retrofit kit is available for field installation
of locks at a later date if required.
Locks are keyed randomly unless otherwise
specified. Other keying options include
keyed alike or keyed with lock cores
K001-K250. All random keyed locks are
factory-installed and have a black finish.
Pedestal Accessories
A hanging file bar for front-to-back or side-toside
filing is included with Series 1 pedestals.
18D
Front-to-Back
(letter)
30W
24D
Side-to-Side
(letter)
30D
Side-to-Side
(legal)
Doublewide Pedestal
Mobile Pedestal
Pedestal Filing Configurations
Doublewide Pedestal Filing Configurations
232