download - Knoll

Preconfigured Desks
Series 2 Freestanding Corner Unit
Specifications
Dividends Horizon
Series 2 Freestanding Corner
Units (Assembly)
Dividends Horizon Series 2 freestanding
corner units are available ‘‘Preconfigured’’
and can also be specified by component
for ‘‘Build-to-Spec’’ applications.
‘‘Preconfigured’’ freestanding corners consist
of a worksurface, three ‘‘L’’ shaped end
units and two full height back panels.
Available Sizes
1 2
Construction
Corner Unit:
1
board core with high pressure laminate
surface and 2mm vinyl edge banding
full height back panels
Rear Corner End Unit
3 1 2
of height adjustment
Side Corner End Unit
3
1 1 2
Freestanding Corner End Units
(Components)
brackets that allow attachment to corner
unit is used in the rear corner to support the
side corner end unit is attached to both
sides of a corner worksurface for support.
Optional Edge Grommets
Edge grommets are optional and can be
specified factory-installed on center on both
edges along the rear edge of the worksurface.
Grommets can also be ordered as a kit (pattern
number D1WSG) for field installation in any
position along the rear edge of the worksurface.
Series 2 Freestanding Corner Unit Components
Edge Grommet Locations
Edge Grommet
Back Panel
End Unit
Rear Corner
End Unit
Series 2 Freestanding Corner Unit Attached to
Return to Form a "L" Shaped Workstation
342