download - Knoll

120° Planning
Specifications
Dividends Horizon
Worksurface: W12 / W1218 (L/R)
This top, with the T5/T518 transition top
provides a technical office with shared
conferencing space in the ‘‘open house’’ layout.
The 18" return allows ample space in the
supervisory application of the ‘‘full house.’’
Worksurface: W13 / W1318 (L/R)
This surface provides a teaming space with
the T2/T218 transition in the ‘‘open house’’
layout. The W13/W1318 creates generous
worksurface space in the ‘‘full house’’ as well
as the management layout of the ‘‘big house.’’
Transition Tops
Transition tops require columns (not
included) for support. Flat brackets (not
included) are required to attach transition
tops to adjacent worksurfaces.
Application Notes
Dividends Horizon 120 worksurfaces use
cantilevers as their main form of support.
A cantilever must be used at each post
location to support worksurfaces properly.
A pedestal may be used for support, where
applicable, in conjunction with cantilevers.
Worksurface: W12 / W1218 (L/R)
Transition Tops
left
right
Transition top: T2
Transition top: T218
Worksurface: W13 / W1318 (L/R)
This surface provides a teaming space with the T2/T218 transition in the
‘‘open house’’ layout. The W13/W1318 creates generous worksurface space
in the ‘‘full house’’ as well as the management layout of the ‘‘big house.’’
Worksurface: W13 / W1318 (L/R)
Transition top: T3
left
right
Transition top: T4
Transition top: T5
Transition top: T518
170