download - Knoll

Desk Components
Half Height Back Panels
Planning Guidelines
Dividends Horizon
Half Height Back Panels
Dividends back panels extend between
pedestals, end units or desk integration
end units in freestanding desks. They also
extend between end units in returns and
along the rear surface of bridge units. Back
panels are softly-radiused to match the
aesthetics of the Dividends Horizon system
and extend 11" down from the worksurface
to provide a half-height modesty.
desks or can be specified separately by
Available Sizes
5 / 8" to 48 1 / 4" see
compatibility chart (below)
Back Panel Attachment
Back panels attach to the undersides of
worksurfaces with mounting brackets and do
not require attachment to adjacent pedestals
or end units. Dividends Horizon worksurfaces
are pre-drilled for back panel attachment.
Construction
Back panel specifications:
Back Panel Compatibility
The chart below shows which back panels
are specified for various configurations.
Optional Grommets/Wire Management
When installed, back panels provide a 1 / 2"
reveal between the back panel and worksurface
for wire management. Optional edge
grommets are required to provide access.
Desk Configurations
Return
Back Panel
Desk
Back Panel
Back Panel Compatibility
Product
Worksurface
Width
Back
Panel
Width
Back Panel
Pattern No.
No. of
Required
Peds/End
Units
Desks 54 23 / 8 " DD1 BPD54 2
60 29 / 8 DD1 BPD60 2
66 35 / 8 DD1 BPD66 2
41 / 8 2
Returns 36 21 5 / 8 DD1 BPR36 1
42 5 / 8 DD1 BPR42 1
48 33 5 / 8 DD1 BPR48 1
60 45 5 / 8 DD1 BPR60 1
Bridge Units 30 31 3/ 8 DD1 BPB30 0
36 / 8 DD1 BPB36 0
42 43 3/ 8 DD1 BPB42 0
48 49 3/ 8 DD1 BPB48 0
‘‘U’’ Credenza
w/2 peds
26 15 / 16 3
Freestanding 36 20 15 / 16 DD1 BPV36 3
Corner Unit (needs 42 26 15 / 16 DD1 BPV42 3
two back panels) 48 32 15 / 16 DD1 BPV48 3
Note: Specify ‘‘desk’’ back panels from category (above) for use
with desk integration end units and intermediate end units.
Bridge Unit
Back Panel
"U" Credenza
Back Panel
352