download - Knoll

Wall Mount Tracks and Components
Specifications
Dividends Horizon
Tile Supports
Tile supports are specified in the same manor
as with Dividends Horizon panels, and are not
required at the top of bottom of wall tracks, or
with Slatwall. Specify Wall Track tile support
mounting brackets for each tile support.
Tiles
Standard Dividends Horizon tiles
are specified with Wall Tracks.
Wall tracks support monolithic or tiled
applications, using standard fabric, steel,
or Slatwall tiles. Specify bottom channels
at the bottom of the lowest tile.
Unlike panels, Wall Tracks accommodate tile
supports at 7" inch increments, increasing
design flexibility. Both D1 and D2 tile
supports may be used with Wall Tracks.
For tiled applications, specify standard tile
supports, and DP1WTTSB tile support
mounting brackets for D2 tile supports.
Worksurface Planning
Dividends Horizon worksurfaces up to
24" deep may be mounted to wall tracks,
using the same cantilevers, end supports
and end panels used in panel planning,
and follow the same planning rules.
Wall Track Planning
Wall tracks may be positioned on 6" width
increments, from 24" to a maximum of 48".
Worksurfaces are supported with standard
supports, including cantilevers, end supports,
and end panels. Maximum worksurface
depth when cantilever supported is 24".
One overhead may be mounted
on each wall track section.
Post Connectors/End Trim
141