download - Knoll

Preconfigured Desks
Freestanding Corner Unit
24 Deep
Dividends Horizon
description type w * w d h pattern no. P1 P2 P3
Freestanding Corner Unit (Assembly) 36 35 1 /2 23 1 /2 28 1 /2 DD1VD 3624 N $1,305. $1,437. $1,502.
42 41 1 /2 23 1 /2 28 1 /2 DD1VD 4224 N 1,349. 1,484. 1,551.
48 47 1 /2 23 1 /2 28 1 /2 DD1VD 4824 N 1,416. 1,556. 1,627.
Freestanding Curved Corner Unit (Assembly) 36 35 1 /2 23 1 /2 28 1 /2 DD1VL 3624 N 1,333. 1,467. 1,535.
42 41 1 /2 23 1 /2 28 1 /2 DD1VL 4224 N 1,415. 1,555. 1,626.
48 47 1 /2 23 1 /2 28 1 /2 DD1VL 4824 N 1,477. 1,626. 1,698.
Freestanding Corner End Unit (Component) 6 9 /16 6 9 /16 26 7 /8 DD1R CU6 274. 303. 316.
Freestanding Corner Unit (Component) 6 9 /16 12 9 /16 26 7 /8 DD1S CU12 323. 354. 372.
Back Panels for Freestanding Corner Unit
(Component)
full height 36 20 15 /16 26 5 /8 DD1 FBPV36 195. 212. 222.
full height 42 26 15 /16 26 5 /8 DD1 FBPV42 197. 215. 226.
full height 48 32 15 /16 26 5 /8 DD1 FBPV48 200. 219. 229.
half height 36 20 15 /16 11 DD1 BPV36 163. 178. 185.
half height 42 26 15 /16 11 DD1 BPV42 171. 188. 197.
half height 48 32 15 /16 11 DD1 BPV48 179. 199. 207.
Freestanding Desks
w* = nominal width
Dimensions listed under wdhareactual to the nearest 1 /16
Ordering Information
Order Code
Included with:
Options
Freestanding Corner
1. Pattern Number
2. Laminate Finish
3. Edge Band Finish
4. Paint Finish
Freestanding Corner End Unit
1. Pattern Number
2. Paint Finish
Freestanding Corner Back Panel
1. Pattern Number
2. Paint Finish
Freestanding Corner
Example: DD1VD 3624 N, 117,
117, 117
DD1VD Pattern Number
3624
N No Grommets
117 Soft Grey laminate
117 Soft Grey edge finish
117 Soft Grey paint finish
Freestanding Corner End Unit
Example: DD1R CU6, 117
DD1R Pattern Number
CU6
117 Soft Grey paint finish
Freestanding Corner Back Panel
Example: DD1 BPV42, 115
DD1 Pattern Number
BPV42
115 Medium grey paint
finish
Freestanding Corner
• Corner supports (3)
• Back panels (2)
• Corner worksurface
• Connecting hardware
Freestanding Corner End Unit
Freestanding Corner Back Panel
Note: Series 1 freestanding corner
units have a curved half modesty
panel.
Note: An upcharge applies when
specifying Legacy laminates. See
Legacy finish page.
Freestanding Corner
• To specify two center-mounted
edge grommets, replace the suffix
letter ‘‘N’’ with a ‘‘G’’.
Add $28.
Freestanding Corner End Unit
Freestanding Corner Back Panel
345