download - Knoll

Monolithic Panel Fabric Inserts
Specifications
Dividends Horizon
Monolithic Fabric Inserts
Dividends Horizon monolithic inserts are
available by component for use with panel
frames or wall mount tracks for ‘‘Build-to-Spec’’
applications. These applications include when
inserts are only required on one panel side,
when a different fabric is required on each panel
side, or when wall mount tracks are being used.
Tile to floor option available for
57", 64" and 78" panel heights.
Monolithic Fabric Insert Construction
Fabric laminated with adhesive, heat-cured
to 7 / 16" thick tackable acoustical board.
Monolithic Fabric Insert Ratings
Sound Transmission Class (STC) rating: 11
The materials in Dividends Horizon panels
meet the flame spread and smoke
generation criteria established in UL1286
safety standard for office furniture.
Monolithic Fabric Insert Attachment
Panel inserts flex to attach to the troughs in the
upper and lower horizontal panel frame supports
or to the bottom tile channel in a wall mount
track application. Mounting clips are attached to
panel inserts for connection to the vertical frame
or wall mount tracks for additional support.
No tools are required for insert attachment.
Note: If additional mid-span support for
monolithic panel inserts is required, a
beltway cable tray can be installed.
Note: Insert dimensions are nominal.
Inserts are for one side only.
Note: Worksurface height monolithic
tiles are to be used with worksurface
height panel frames only.
Monolithic Fabric Insert
Monolithic Fabric Insert Configurations
Worksurface Height
monolithic insert
36"H Panel Frames
42"H Panel Frames
50"H Panel Frames
57"H Panel Frames
Panel Frame
Insert Attachment
Upper Connection
64"H Panel Frames
Monolithic Fabric Insert
Monolithic Fabric
Insert Attachment
78"H Panel Frames
56