download - Knoll

Desk Components
End Units
Planning Guidelines
Dividends Horizon
Desk End Units
Dividends desk end units are an ‘‘L’’ shaped,
non-handed design that can be used on either
end of a worksurface in freestanding and panel
applications. Desk end units have the same
footprint (outside dimension) as pedestals
and can be interchanged with pedestals.
End units are used in ‘‘Preconfigured’’ single
pedestal desks and end panel returns.
They can also be specified by component
for ‘‘Build-to-Spec’’ applications.
on one end and a desk integration unit is
Available Sizes
Depths: 18", 24" and 30"
Width: 15"
Height: 26 7 / 8"
Desk End Unit Attachment
Desk end units have mounting brackets
that allow attachment to worksurfaces with
supplied screws. Dividends worksurfaces
are pre-drilled for end unit attachment.
Construction
End unit specifications:
3 / 8" 16-gauge steel
with 1 1 / 2" of height adjustment
Desk Integration End Units
systems application, a desk integration end
unit can be used in place of an end unit.
Panel-to-worksurface brackets are included
and make the connection between the
worksurface and Dividends Horizon panels.
Desk integration end units are 15" wide.
Note: The desk integration end unit
is a non-structural support. Panelto-work
surface brackets provide the
actual support for the worksurface.
Note: Panel width must match the depth
of the connecting worksurface.
Construction
Desk integration end unit specifications:
Intermediate End Units
Intermediate end units are freestanding
‘‘T’’ shaped end units used to support
two desks in an in-line configuration.
Units attach to 18", 24" and 30"
deep worksurfaces in place of desk
end units. Mounting brackets and a
front worksurface alignment plate are
included with intermediate end units.
Available Size
7 / 8"
Construction
Intermediate end unit specifications:
Desk End Unit
Intermediate End Unit
Desk End Unit Available Sizes
18D
24D
30D
15W 15W 15W
End Unit Configurations
Desk Integration End Unit
(Non-structural)
Desk Integration
End Unit
Intermediate
End Unit
350