download - Knoll

Panel Specifications
Dividends Horizon
Open Position Planner
Dividends Horizon now offers an industry
leading technology called Open Position Planner,
allowing customers and dealers to design,
specify and order factory-assembled Dividends
Horizon panels in virtually any configuration.
This powerful specification tool eliminates the
need for most built-to-spec panels. Since
panels arrive at the job site assembled,
installation labor is also reduced.
The functionality of Open Position Planner
is available only to electronic specification
users, and is not available in this price list.
‘‘Build-to-Spec’’ Panels
‘‘Build-to-Spec’’ panels are specified by
component for special applications. These
include: when a different fabric is required
on each panel side and when retrofitting
existing panels to another style. Panels and
components are not shipped assembled.
Universal Panel Connectors
Universal panel connectors are included
with Dividends panels. Panel connection
hardware is universal to allow:
• Same-height straight panelto-panel
connections
• High-low straight panel-to-panel connections
• Straight high-low panel-to-post connections
Included with universal panel
connection hardware:
• Upper wedge block connector
• Lower cactus connectors
Universal panel connection
hardware construction:
• Lower connectors: Welded 14-gauge
steel cactus style connectors
• Upper connector: Die cast wedge
block with 13-gauge steel alignment
bracket and 4 1/2" tension screw
Panel Attachment
The lower cactus style connectors engage the
lower frames of adjacent panels. The upper
wedge block engages the upper frames.
The connection is secured by tightening
the upper connector’s tension screw.
Panel-to-Panel Top Cap Transition
Top cap transitions fill the gap between
panel top cap sections in straight
panel-to-panel configurations.
• Construction: Trim-color black
when used with veneer top caps
• Size: 1" wide by 3" deep
• Attachment: Snaps between top cap sections
in straight, same-height panel configurations
Note: Panel-to-panel top cap transitions
are ordered separately from panels.
Top Cap
Top cap is included with preconfigured panels.
• Construction: Plastic top caps are
trim colored, softly radiused plastic
extrusion. Veneer top caps are techgrain
veneer over plastic extrusion. Metal top
caps, available in both radius and flat
profiles, are powder coated steel.
• Attachment: Snaps onto the trough
of a topway panel frame. Retainer
clips are used to attach the top cap
to the top rail of a full view frame.
Panel End Trim
Panel end trim matches the aesthetics of the
panel top cap. It is used to end a panel run
and for high-low, panel-to-panel applications.
Four panel trim options are available:
• Enhanced smooth plastic
• Radius Metal
• Flat Metal
• Thin Profile Flat
Note: Panel end trim is ordered separately
from panels. Included with the panel end
trim are panel end trim brackets.
• Construction: Standard panel end trims are
trim colored, softly radiused plastic extrusions
with a plastic injection molded end cap.
Metal trim is extruded aluminum
with powder coat finish.
• Attachment: Panel-mount brackets are
fastened to the panel with thread-forming
screws into pre-punched holes. End trim
snaps onto panel mount brackets.
The panel end top cap snaps over the
panel end trim and panel top trim.
Top cap
Panel frame
Upper
connector
Lower
connector
Panel end cap
Universal
panel
connectors
Panel insert
Panel Connection Hardware
Panel mount brackets
Panel End Trim Attachment
Base raceway cover
Monolithic Panel
Panel Attachment
9