ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

3-12 Chapter 3: 7401-2xxx/3xxx Hardware Installation
Cable Connector Identification
1. Connect the peripheral and LAN cables. The illustration below can
be used to identify the connectors on the terminal. See the sections
that follow for specific installation instructions for each of the
peripherals.
Audio Out
Speaker
CRT
LAN
S-Video
USB 1
USB 2
COM 1
RS-232
(COM 3 & 4)
Keyboard
PS/2
COM 2
Parallel
Power
IRDA
Microphone
(optional)
Cash Drawer
Note: COM1 and COM3 can be powered ports. They are enabled in
the BIOS.
18010
Note: The COM3 & COM4 RS‐232 ports require the Dual RS‐232 Port
Kit (7454‐F072) feature
2. After installing the peripheral and LAN cables replace the cable
cover and re‐tighten the thumbscrew.