ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

Chapter 6: Operating System Recovery 6-3
Updating Procedures
1. Apply power to the terminal so the CD‐ROM drive can be opened.
2. Insert the CD that contains the operating system image.
7401 Model Software CD LPINs
Win2000 WinXPe WinNT Win98
7401‐21xx, 31xx Not Supported Not Supported D370‐0433‐0100 D370‐0444‐0100 *
7401‐22xx, 25xx,
32xx, 35xx
D370‐0504‐0100 D370‐0485‐0100 D370‐0483‐0100 D370‐0481‐0100 *
7401‐26xx D370‐0484‐0100 D370‐0567‐0100 D370‐0483‐0100 Not Supported
7401‐45xx D370‐0554‐0100 Not Supported D370‐0553‐0100 Not Supported
7401‐46xx D370‐0484‐0100 D370‐0567‐0100 D370‐0553‐0100 Not Supported
* Support for Windows 98 has been discontinued.
3. Boot the terminal.
4. Press F2 at the screen prompt to enter the Setup Utility.
5. In the Advanced menu, select I/O Device Configuration.
6. Verify that LPT 1 Mode is set to ECP.
7. Go back to the Advanced menu, select Multiple ROM Menu.
8. Set the Parallel CD-ROM Boot to Enabled.
9. Exit Setup and Save Changes.
As the terminal reboots, you should see a message during boot
indicating that the CD‐ROM has been recognized:
Micro Solutions BACKPACK CD-ROM v0.3
. . .
Booting from BACKPACK CD
Starting MS-DOS