ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

4-8 Chapter 4: 7401-4xxx Hardware Installation
3. Lift the door until it is supported on the Gas Shock.
4. Remove the MSR Blank from the right side of the Cabinet.
5. Remove the Cable Clamp.
6. Plug the MSR cable into the MSR Connector on the Core Module.
Cable Clamp
MSR Connector
7. Attach the MSR assembly using the MSR Mounting screws (2).
8. Attach the Cable Clamp removed in step 5 to the MSR Mounting
Bracket (rear hole).
19904a
Installing Country Keyboards
The following international country keyboards are shipped separate
from the 7401‐4xxx terminal and must be installed in the field. The
required keyboard and trackball cables are pre‐installed in the 7401‐
4xxx keyboard tray.
• Swedish/Finnish Rugged Keyboard (2336‐K206)
• Italian Rugged Keyboard (2336‐K207)
Use the following procedures to install a country keyboard.
1. Unplug the power cord to remove power from the terminal.