ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

Chapter 1: 7401-2xxx/3xxx Product Overview 1-39
Uninterruptible Power System (Optional)
The 4055 Uninterruptible Power System (UPS) protects your
equipment from various power related problems, providing visual and
audible indicators which alert you to utility‐line failures. The 4055 is
installed inside the pedestal mount, and includes a data line/LAN
connection which ensures both the AC and data paths are protected
from surges and noise transmitted through the power lines.
Integrated Scanner Module (Optional)
The scanner, power supply, and Scanner Controller Board are located
inside the Fixed‐Angle Mount. The scanner interface is serial, and is
connected to RS‐232/1, which is a powered serial port.
Note: The Integrated Scanner feature includes the Fixed‐Angle Mount
and cannot be used with the Table Top Mount.
The 7401 Scanner is a modified NCR 7890 or NCR 7892 Scanner,
however, there are a few differences. Refer to the NCR 7401/7890 or
7892 Scanner Differences chapter for additional information.
Integrated Speaker Module (Optional)
The Integrated Speaker feature provides two stereo speakers that
attach to the bottom of the Core Module. The maximum output of the
speakers is approximately 6 watts per channel.
Compact Flash (Optional)
The 256MB compact flash can be used in a Windows XP embedded
environment. When using the Windows XP embedded OS, an
additional 128MB SDRAM SODIMM is required to support the
necessary virtual memory requirements. The 256MB compact flash
replaces the hard drive in the unit.