ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

3-14 Chapter 3: 7401-2xxx/3xxx Hardware Installation
2. Connect the other end of the printer cable to one of the RS‐232
(non‐powered) ports on the terminal.
3. Connect the external power supply cable to the Power Connector
on the printer.
4. Plug the external power supply AC cable into an AC outlet.
USB Installation
1. Connect the Printer Interface Cable to the USB Connector on the
back or on the bottom of the printer.
USB Connector
Cash Drawer Connector
Power Connector
2. Connect the other end of the printer cable to one of the USB
connectors (USB 1 or USB 2) on the terminal.
16632b
3. Connect the external power supply cable to the Power Connector on
the printer.
4. Plug the external power supply AC cable into an AC outlet.