ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

Chapter 3: 7401-2xxx/3xxx Hardware Installation 3-23
2. The cables for the 7401 can be routed through an opening in the
back of the Fixed‐Angle Mount, or you can remove the plastic
knockout in the bottom of the mount to permit routing the cables
down through the flat surface. If you are routing cables out the
bottom, drill a hole in the flat surface aligned with the rectangular
opening in the Mounting Plate.
3. Install the 7401 to the Mounting Plate. The slots on the bottom of
the Fixed‐Angle Mount mate to locking tabs on the Mounting Plate.
4. Install the Securing Screw.