ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

4-22 Chapter 4: 7401-4xxx Hardware Installation
4055 Uninterruptible Power System (UPS)
The NCR 4055 UPS is available in two models for the 7401:
Item Description Volt/Hz
4055‐1300‐7194 300 VA/180 Watt Kiosk UPS 120 Volt/60 Hz
4055‐1500‐7194 500 VA/300 Watt Kiosk UPS 120 Volt/60 Hz
Power Mon II® Software (G099‐4551‐0100) is recommended for use
with the 4055 UPS and the 7401.
Note: On Windows 2000, the Power Mon software may appear to not
fully shut the system down. In such cases you may still see a dim
display. This does not cause the loss of any data.
19412
Installing the UPS
Refer to the User’s Manual delivered with the NCR 4055 UPS before
installing the UPS for use with the 7401.
To install the UPS with the 7401 connect the power cable and the LAN
cable from the 7401 to the UPS. Then connect the in‐house LAN cable
to the UPS, and the power cable on the UPS to the AC power outlet.
Note: If you are installing 7401‐4xxx on the EasyPoint 45 Pedestal, the
UPS must be installed first. See 2336‐K045 Feature Kit for more
information.