ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

4-20 Chapter 4: 7401-4xxx Hardware Installation
Accessing the Mounting Screws
The following steps describe how to remove the Motorized Card
Reader, Keyboard, and Sliding Drawer assembly to provide access the
mounting screws.
1. Unlock the cabinet lock and raise the core module door to open the
cabinet.
2. Slide the Keyboard Tray forward until it stops.
3. Remove the Motorized Card Reader (if present) as described in the
“Removing the Motorized Card Reader” section in Chapter 4 of the
NCR EasyPoint 7401 Hardware Service Guide (B005‐0000‐1341).
4. Remove the Keyboard as described in the “Removing the Keyboard
Assembly” section in Chapter 4 of the NCR EasyPoint 7401
Hardware Service Guide (B005‐0000‐1341).
5. Feed the cables through the hole in the Keyboard Tray.
6. Release the Rail Latches and remove the Sliding Drawer assembly.
7. Remove the two screws holding the terminal to the mount.