ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

3-42 Chapter 3: 7401-2xxx/3xxx Hardware Installation
The following illustration shows the maximum allowable dimensions
for the display opening when the optional cosmetic bezel is not used.
Gasket must meet inside surface of custom
application's display opening. This is to provide
a secure and watertight fit.
312.5 mm
12.305 in. 13.7 mm
0.540 in.
27.5 mm
1.083 in.
235.6 mm
9.275 in.
Use four #8-32 machine screws in the
corners of the unit to mount the display
into an enclosure. Six total screws may
be used for multiple mounting configurations.
345.4 mm
13.6 in.
156.2 mm
6.15 in.
175 mm
6.888 in.
141.6 mm
5.575 in.
292.4 mm
11.51 in.
22.9 mm
0.900 in.
200.7 mm
17.2 mm
7.9 in.
0.678 in.
19101