ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

3-18 Chapter 3: 7401-2xxx/3xxx Hardware Installation
Installing PC Cards
PC cards (wireless, modem, and so forth) can be installed on any
terminal with the Dual PCMCIA Port (7401‐K060).
Only terminals with a Fixed‐Angle Mount require the removal of the
Core Module from the mount to install a PC card. If you do not have a
Fixed‐Angle Mount terminal, skip to Step 3.
1. Remove the screws that secure the Core Module to the Fixed‐Angle
Mount.
Core Module
Remove Screws
(one on each side)
Pedestal Mount
16396