ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

6-12 Chapter 6: Operating System Recovery
The following drivers are not installed automatically, but can be
installed from their respective locations:
• Backpack CD‐ROM (3.02) C:\Install\Drivers\CDRom
• Magtec MCR (1.01.07) C:\Install\Drivers\MCR
• USB Camera (2.15) C:\Install\Drivers\Camera
• Edgeport USB (2.15) C:\Install\Drivers\USB
Configures the following settings/revisions:
• Preinstalls W2K to include the Product ID Number (PID)
• Places the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
• Runs Sysprep, using sysprep.inf and sysprep.bat, so that the mini
installation will run on initial boot with the following parameters:
−
Automatically include PID
• Establishes a FAT32 primary system partition that fills the entire
drive
• Includes necessary OS cab files in C:\Install
• Installs SMI Control Panel (4.3.5)
• Installs Intel Proset utility
• Enables PME (in Intel Proset utility) set to ʹHardware Defaultʹ
• Enables DMA (DMACheck.exe provided in C:\Install)
• Sets Resolution to 800x600, color to High
• Makes PinPad testing folder available in C:\Install\Drivers\PinPad
• Replaces the standard EULA with the NCR‐specific EULA
• Installs MS SNMP, set to Manual