ncr/doc/Kiosks/TechnicalManuals/7401_Kiosk_Har... - Alsys Data

Chapter 3: 7401-2xxx/3xxx Hardware Installation 3-27
2. Loop one end of the metal strap through the slot on the clamp.
Loop strap through slot
3. Insert the end of the clamp into the slot on the Wall Bracket as
shown below.
16417
Locking Tabs
(facing away from pole
and pointing up)
Wall Bracket
Route clamp
through opening
nearest to pole
Insert clamp into slot
18009
Note: There are two openings that the clamp can be routed
through. Use the larger opening for round poles (nearest the pole).
Use the narrow slot for square/rectangular poles.