CME34M Hardware Manual - RTD Embedded Technologies, Inc.
CME34M Hardware Manual - RTD Embedded Technologies, Inc.
CME34M Hardware Manual - RTD Embedded Technologies, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 5<br />
<strong>CME34M</strong> Basic Connectors<br />
Connector Function Size and Pitch Mating Connector<br />
CN1 PCIe/104 Type 2 Bus (Top) 156-pin, 0.635mm Samtec ASP-129646-03<br />
CN2 PCIe/104 Type 1 Bus (Bottom) 156-pin, 0.635mm Samtec ASP-129637-03<br />
CN3 Auxiliary Power 1x10, 0.1” FCI 65039-027LF<br />
CN5 Utility Port 2x5, 0.1” 3M 89110-0001<br />
CN6 aDIO 2x8, 0.1” 3M 89116-0001<br />
CN7 Serial Port 1 (COM1&3) 2x5, 0.1” 3M 89110-0001<br />
CN8 Serial Port 2 (COM2&4) 2x5, 0.1” 3M 89110-0001<br />
CN13 RTC Battery Input (optional) 1x2, 2mm FCI 69305-002LF<br />
CN15 Fan Power (switched) 1x3, 2mm FCI 69305-003LF<br />
CN17 USB 2.0 2x5, 0.1” 3M 89110-0001<br />
CN18 Video (SVGA) 2x5, 0.1” 3M 89110-0001<br />
CN20 Ethernet 2x5, 0.1” 3M 89110-0001<br />
CN30 Ethernet 2x5, 0.1” 3M 89110-0001<br />
U6 SATA Disk Chip Socket 18-pin, 0.1” n.a.<br />
WARNING If you connect power incorrectly, the module will almost certainly be damaged or destroyed.<br />
Such damage is not covered by the <strong>RTD</strong> warranty! Please verify connections to the module before<br />
applying power.<br />
Power is normally supplied to the cpuModule through the PCIe bus connectors (CN1 or CN2). If you are placing<br />
the cpuModule onto a PC/104 stack that has a power supply, you do not need to make additional connections<br />
to supply power.<br />
If you are using the cpuModule without a PC/104 stack or with a stack that does not include a power supply,<br />
refer to Auxiliary Power (CN3) on page 26 for more details.<br />
BDM-610000076 Rev A Chapter 2: Getting Started 17
Change language