CME34M Hardware Manual - RTD Embedded Technologies, Inc.
CME34M Hardware Manual - RTD Embedded Technologies, Inc.
CME34M Hardware Manual - RTD Embedded Technologies, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced Digital I/O (aDIO) Port (CN6)<br />
CN6 is configured as an aDIO port. aDIO is 12 digital bits configured as 8-bit programmable and 4-bit port<br />
programmable I/O, providing any combination of inputs and outputs. Match, event, and strobe interrupt modes<br />
mean no more wasting valuable processor time polling digital inputs. Interrupts are generated when the 8-bit<br />
programmable digital inputs match a pattern, or on any value change event. Bit masking allows selecting any<br />
subgroup of 8 bits. The strobe input latches data into the bit programmable port and generates an interrupt.<br />
Refer to Advanced Digital I/O Ports (aDIO)—page 60 for information on programming the aDIO.<br />
Table 23<br />
aDIO Pinout<br />
CN6 Pin Function CN6 Pin Function<br />
1 P0-0 2 P0-1<br />
3 P0-2 4 P0-3<br />
5 P0-4 6 P0-5<br />
7 P0-6 8 P0-7<br />
9 strobe 0 10 strobe 1<br />
11 P1-0 12 P1-1<br />
13 P1-2 14 P1-3<br />
15 GND 16 +5 V 1<br />
1. Available during standby.<br />
BDM-610000076 Rev A Chapter 3: Connecting the cpuModule 37