17.06.2014 Views

CME34M Hardware Manual - RTD Embedded Technologies, Inc.

CME34M Hardware Manual - RTD Embedded Technologies, Inc.

CME34M Hardware Manual - RTD Embedded Technologies, Inc.

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 1<br />

Introduction<br />

This manual provides comprehensive hardware and software information for users developing with the<br />

<strong>CME34M</strong> PCIe/104 cpuModule.<br />

Note Read the specifications beginning on page 9 prior to designing with the cpuModule.<br />

This manual is organized as follows:<br />

Chapter 1<br />

Chapter 2<br />

Chapter 3<br />

Chapter 4<br />

Appendix A<br />

Appendix B<br />

Appendix C<br />

Appendix D<br />

Appendix E<br />

Introduction<br />

introduces main features and specifications<br />

Getting Started<br />

provides abbreviated instructions to get started quickly<br />

Connecting the cpuModule<br />

provides information on connecting the cpuModule to peripherals<br />

Using the cpuModule<br />

provides information to develop applications for the cpuModule, including general<br />

cpuModule information, detailed information on storing both applications and system<br />

functions, and using utility programs<br />

<strong>Hardware</strong> Reference<br />

lists jumper locations and settings, physical dimensions, and processor thermal<br />

management<br />

Troubleshooting<br />

offers advice on debugging problems with your system<br />

IDAN Dimensions and Pinout<br />

provides connector pinouts for the cpuModule installed in an <strong>RTD</strong> Intelligent Data<br />

Acquisition Node (IDAN) frame<br />

Additional Information<br />

lists sources and websites to support the cpuModule installation and configuration<br />

Limited Warranty<br />

BDM-610000076 Rev A Chapter 1: Introduction 1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!