MC52i AT Command Set

More documents

Recommendations

Info

MC52i AT Command Set 5.1 AT+CPIN Notes • Successful PIN authentication only confirms that the entered PIN was recognized and correct. The output of the result code OK does not necessarily imply that the mobile is registered to the desired network. Typical example: PIN was entered and accepted with OK, but the ME fails to register to the network. This may be due to missing network coverage, denied network access with currently used SIM card, no valid roaming agreement between home network and currently available operators etc. MC52i offers various options to verify the present status of network registration: For example, the AT+COPS command indicates the currently used network. With AT+CREG you can also check the current status and activate an unsolicited result code which appears whenever the status of the network registration changes (e.g. when the ME is powered up, or when the network cell changes). • and can also be entered in quotation marks (e.g. "1234"). • To check the number of remaining attempts to enter the passwords use the AT^SPIC command. • See AT+CPWD and AT^SPWD for information on passwords. • See AT+CLCK and AT^SLCK for information on lock types. 5.1.1 What to do if PIN or password authentication fails? PIN1 / PUK1: After three failures to enter PIN 1, the SIM card is blocked (except for emergency calls). +CME ERROR: 12 will prompt the client to unblock the SIM card by entering the associated PUK (= PIN Unblocking Key / Personal Unblocking Key). After ten failed attempts to enter the PUK, the SIM card will be invalidated and no longer operable. In such a case, the card needs to be replaced. PIN1 consists of 4 to 8 digits, PUK1 is an 8-digit code only. To unblock a disabled PIN1 you have two options: • You can enter AT+CPIN=PUK1,new PIN1. • You can use the ATD command followed by the GSM code **05*PUK*newPIN*newPIN#;. PIN2 / PUK2: PIN2 prevents unauthorized access to the features listed in AT+CPIN2. The handling of PIN2 varies with the provider. PIN2 may either be a specific code supplied along with an associated PUK2, or a default code such as 0000. In either case, the client is advised to replace it with an individual code. Incorrect input of PUK2 will permanently block the additional features subject to PIN2 authentification, but usually has no effect on PIN1. PIN2 consists of 4 digits, PUK2 is an 8-digit code only. To unblock a disabled PIN2 you have two options: • You can enter AT+CPIN2=PUK2,new PIN2. • You can use the ATD command followed by the GSM code **052*PUK2*newPIN2*newPIN2#;. Phone lock: If the mobile was locked to a specific SIM card (= "PS" lock or phone lock), the PUK that came with the SIM card cannot be used to remove the lock. After three failed attempts to enter the correct password, ME returns +CPIN: PH-SIM PUK (= response to read command AT+CPIN?), i.e. it is now waiting for the Master Phone Code. This is an 8-digit device code associated to the IMEI number of the mobile which can only by obtained from the manufacturer or provider. When needed, contact Cinterion Wireless Modules GmbH and request the Master Phone Code of the specific module. There are two ways to enter the Master Phone code: • You can enter AT+CPIN=Master Phone Code • You can use the ATD command followed by the GSM code *#0003*Master Phone Code#;. Usually, the Master Phone Code will be supplied by mail or e-mail. If the received number is enclosed in the *# codes typically used for the ATD option, it is important to crop the preceding *#0003* characters and the appended #. Example: You may be given the string *#0003*12345678#. When prompted for the PH-SIM PUK simply enter 12345678. If incorrectly input, the Master Phone Code is governed by a specific timing algorithm: (n-1)*256 seconds (see table below). The timing should be considered by system integrators when designing an individual MMI. MC52i_ATC_V01.201 Page 104 of 551 4/16/10 Confidential / Released
MC52i AT Command Set 5.1 AT+CPIN Number of failed attempts 1st failed attempt 2nd failed attempt 3rd failed attempt 4th failed attempt 5th failed attempt 6th failed attempt and so forth Time to wait before next input is allowed No time to wait 4 seconds 3 * 256 seconds 4 * 256 seconds 5 * 256 seconds 6 * 256 seconds and so forth SIM locks: These are factory set locks, such as "PF", "PN", "PU", "PP", "PC". An 8-digit unlocking code is required to operate the mobile with a different SIM card, or to lift the lock. The code can only be obtained from the provider. Failure to enter the password is subject to the same timing algorithm as the Master Phone Code (see Table above). Call barring: Supported modes are "AO", "OI", "OX", "AI", "IR", "AB", "AG", "AC". If the call barring password is entered incorrectly three times, the client will need to contact the service provider to obtain a new one. Related sections: "+CME ERROR: " values are specified at Section 2.11.1, CME/CMS Error Code Overview. For further instructions and examples see AT+CLCK, AT^SLCK, AT+CPWD and AT^SPWD. For a complete list of Star-Hash codes please refer Section 20.2, Star-Hash (*#) Network Commands. MC52i_ATC_V01.201 Page 105 of 551 4/16/10 Confidential / Released
Page 1 and 2:
MC52i MC52i Terminal Version: 01.20
Page 3 and 4:
MC52i AT Command Set Contents Cont
Page 5 and 6:
MC52i AT Command Set Contents 6.7
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
MC52i AT Command Set List of Figure
Page 15 and 16:
MC52i AT Command Set 1.2 Related d
Page 17 and 18:
MC52i AT Command Set 1.3 Document
Page 19 and 20:
MC52i AT Command Set 1.4 AT Comman
Page 21 and 22:
MC52i AT Command Set 1.6 Supported
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
MC52i AT Command Set 1.8 Errors an
Page 29 and 30:
MC52i AT Command Set 1.10 Serial I
Page 31 and 32:
MC52i AT Command Set 2. Configurati
Page 33 and 34:
MC52i AT Command Set 2.2 AT&V 2.2.
Page 35 and 36:
MC52i AT Command Set 2.4 ATQ 2.4 A
Page 37 and 38:
MC52i AT Command Set 2.6 ATX 2.6 A
Page 39 and 40:
MC52i AT Command Set 2.8 AT+CFUN 2
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
MC52i AT Command Set 2.10 AT+GCAP
Page 47 and 48:
MC52i AT Command Set 2.11 AT+CMEE
Page 49 and 50:
MC52i AT Command Set 2.11 AT+CMEE
Page 51 and 52:
MC52i AT Command Set 2.12 AT+CSCS
Page 53 and 54: MC52i AT Command Set 2.13 AT^SCFG
Page 63 and 64: MC52i AT Command Set 3. Status Cont
Page 65 and 66: MC52i AT Command Set 3.2 AT+CIND 3
Page 67 and 68: MC52i AT Command Set 3.2 AT+CIND N
Page 69 and 70: MC52i AT Command Set 3.3 AT^SIND U
Page 71 and 72: MC52i AT Command Set 3.3 AT^SIND E
Page 73 and 74: MC52i AT Command Set 3.3 AT^SIND +
Page 75 and 76: MC52i AT Command Set 3.4 AT+CEER
Page 77 and 78: MC52i AT Command Set 3.4 AT+CEER N
Page 79 and 80: MC52i AT Command Set 3.4 AT+CEER 3
Page 81 and 82: MC52i AT Command Set 3.4 AT+CEER 3
Page 83 and 84: MC52i AT Command Set 3.4 AT+CEER N
Page 85 and 86: MC52i AT Command Set 3.5 ATS18 3.5
Page 87 and 88: MC52i AT Command Set 3.6 AT+CPAS 3
Page 89 and 90: MC52i AT Command Set 4. Serial Inte
Page 91 and 92: MC52i AT Command Set 4.3 AT&D 4.3
Page 93 and 94: MC52i AT Command Set 4.5 ATE 4.5 A
Page 95 and 96: MC52i AT Command Set 4.6 AT+ILRR 1
Page 97 and 98: MC52i AT Command Set 4.7 AT+IPR 24
Page 99 and 100: MC52i AT Command Set 4.8 AT+CMUX 4
Page 101 and 102: MC52i AT Command Set 4.8 AT+CMUX C
Page 103: MC52i AT Command Set 5.1 AT+CPIN P
Page 107 and 108: MC52i AT Command Set 5.2 AT+CPIN2
Page 109 and 110: MC52i AT Command Set 5.3 AT^SPIC
Page 111 and 112: MC52i AT Command Set 5.3 AT^SPIC a
Page 113 and 114: MC52i AT Command Set 5.4 AT+CLCK
Page 115 and 116: MC52i AT Command Set 5.4 AT+CLCK
Page 117 and 118: MC52i AT Command Set 5.5 AT^SLCK 5
Page 119 and 120: MC52i AT Command Set 5.6 AT+CPWD
Page 121 and 122: MC52i AT Command Set 5.6 AT+CPWD E
Page 123 and 124: MC52i AT Command Set 6. Identificat
Page 125 and 126: MC52i AT Command Set 6.4 AT+CGMM 6
Page 127 and 128: MC52i AT Command Set 6.8 AT+CGSN 6
Page 129 and 130: MC52i AT Command Set 7. Call relate
Page 131 and 132: MC52i AT Command Set 7.3 ATD 7.3 A
Page 133 and 134: MC52i AT Command Set 7.4 ATD> 7.4
Page 135 and 136: MC52i AT Command Set 7.5 ATD> 7.5
Page 137 and 138: MC52i AT Command Set 7.7 ATDI 7.7
Page 139 and 140: MC52i AT Command Set 7.9 ATH 7.9 A
Page 141 and 142: MC52i AT Command Set 7.11 AT^SHUP
Page 147 and 148: MC52i AT Command Set 7.17 ATO 7.17
Page 149 and 150: MC52i AT Command Set 7.19 AT+CBST
Page 151 and 152: MC52i AT Command Set 7.21 AT+CLCC
Page 153 and 154: MC52i AT Command Set 7.22 AT^SLCC
Page 155 and 156:
MC52i AT Command Set 7.22 AT^SLCC
Page 157 and 158:
MC52i AT Command Set 7.22 AT^SLCC
Page 159 and 160:
MC52i AT Command Set 7.24 AT+CRC 7
Page 161 and 162:
MC52i AT Command Set 7.26 AT^SCNI
Page 163 and 164:
MC52i AT Command Set 7.28 AT^STCD
Page 165 and 166:
MC52i AT Command Set 7.31 ATS2 7.3
Page 167 and 168:
MC52i AT Command Set 8.2 AT+COPS 8
Page 169 and 170:
MC52i AT Command Set 8.2 AT+COPS N
Page 171 and 172:
MC52i AT Command Set 8.3 AT^SOPS
Page 173 and 174:
MC52i AT Command Set 8.4 AT+CREG
Page 175 and 176:
MC52i AT Command Set 8.5 AT+CSQ 8.
Page 177 and 178:
MC52i AT Command Set 8.6 AT^SMONC
Page 179 and 180:
MC52i AT Command Set 8.7 AT^SMOND
Page 181 and 182:
MC52i AT Command Set 8.8 AT^MONI 8
Page 183 and 184:
MC52i AT Command Set 8.8 AT^MONI C
Page 185 and 186:
MC52i AT Command Set 8.9 AT^MONP 8
Page 187 and 188:
MC52i AT Command Set 8.10 AT^SMONG
Page 189 and 190:
MC52i AT Command Set 8.11 AT^SALS
Page 191 and 192:
MC52i AT Command Set 8.13 AT^SPLM
Page 193 and 194:
MC52i AT Command Set 8.15 AT^SPLR
Page 195 and 196:
MC52i AT Command Set 9. Supplementa
Page 197 and 198:
MC52i AT Command Set 9.2 AT^SACM
Page 199 and 200:
MC52i AT Command Set 9.4 AT+CAOC 9
Page 201 and 202:
MC52i AT Command Set 9.5 AT+CCUG
Page 203 and 204:
MC52i AT Command Set 9.6 AT+CCFC
Page 205 and 206:
MC52i AT Command Set 9.6 AT+CCFC
Page 207 and 208:
MC52i AT Command Set 9.7 AT+CCWA P
Page 209 and 210:
MC52i AT Command Set 9.7 AT+CCWA E
Page 211 and 212:
MC52i AT Command Set 9.8 AT+CHLD N
Page 213 and 214:
MC52i AT Command Set 9.9 AT+CLIP
Page 215 and 216:
MC52i AT Command Set 9.11 AT+COLP
Page 217 and 218:
MC52i AT Command Set 9.12 AT+CPUC
Page 219 and 220:
MC52i AT Command Set 9.13 AT+CSSN
Page 221 and 222:
MC52i AT Command Set 9.14 AT+CUSD
Page 223 and 224:
MC52i AT Command Set 10. Internet S
Page 225 and 226:
MC52i AT Command Set = "none". Thi
Page 227 and 228:
MC52i AT Command Set 10.1 AT^SICS
Page 229 and 230:
MC52i AT Command Set 10.1 AT^SICS
Page 231 and 232:
MC52i AT Command Set 10.2 AT^SICI
Page 233 and 234:
MC52i AT Command Set 10.3 AT^SISS
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
MC52i AT Command Set 10.4 AT^SISI
Page 245 and 246:
MC52i AT Command Set 10.5 AT^SISO
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
MC52i AT Command Set 10.6 AT^SISC
Page 253 and 254:
MC52i AT Command Set 10.7 AT^SISR
Page 255 and 256:
MC52i AT Command Set 10.8 AT^SISW
Page 257 and 258:
MC52i AT Command Set 10.8 AT^SISW
Page 259 and 260:
MC52i AT Command Set 10.9 AT^SIST
Page 261 and 262:
MC52i AT Command Set 10.11 Interne
Page 263 and 264:
MC52i AT Command Set 10.11 Interne
Page 265 and 266:
MC52i AT Command Set 10.12 Example
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
MC52i AT Command Set 11. GPRS Comma
Page 279 and 280:
MC52i AT Command Set 11.2 AT+CGANS
Page 281 and 282:
MC52i AT Command Set 11.3 AT+CGATT
Page 283 and 284:
MC52i AT Command Set 11.4 AT+CGAUT
Page 285 and 286:
MC52i AT Command Set 11.5 AT+CGERE
Page 287 and 288:
MC52i AT Command Set 11.6 AT+CGDAT
Page 289 and 290:
MC52i AT Command Set 11.7 AT+CGDCO
Page 291 and 292:
MC52i AT Command Set 11.9 AT+CGQMI
Page 293 and 294:
MC52i AT Command Set 11.9 AT+CGQMI
Page 295 and 296:
MC52i AT Command Set 11.10 AT+CGQR
Page 297 and 298:
MC52i AT Command Set 11.10 AT+CGQR
Page 299 and 300:
MC52i AT Command Set 11.11 AT+CGRE
Page 301 and 302:
MC52i AT Command Set 11.12 AT+CGSM
Page 303 and 304:
MC52i AT Command Set 11.14 AT^SGCO
Page 305 and 306:
MC52i AT Command Set 11.16 ATD*99#
Page 307 and 308:
MC52i AT Command Set 11.18 ATH 11.
Page 309 and 310:
MC52i AT Command Set 11.20 Using G
Page 311 and 312:
MC52i AT Command Set 11.21 Using t
Page 313 and 314:
MC52i AT Command Set 12.1 FAX para
Page 315 and 316:
MC52i AT Command Set 12.2 AT+FBADL
Page 317 and 318:
MC52i AT Command Set 12.4 AT+FBOR
Page 319 and 320:
MC52i AT Command Set 12.6 AT+FCLAS
Page 321 and 322:
MC52i AT Command Set 12.8 AT+FCR 1
Page 323 and 324:
MC52i AT Command Set 12.10 AT+FDFF
Page 325 and 326:
MC52i AT Command Set 12.12 AT+FDR
Page 327 and 328:
MC52i AT Command Set 12.14 AT+FET
Page 329 and 330:
MC52i AT Command Set 12.16 AT+FLID
Page 331 and 332:
MC52i AT Command Set 12.18 AT+FMFR
Page 333 and 334:
MC52i AT Command Set 12.20 AT+FPHC
Page 335 and 336:
MC52i AT Command Set 12.22 AT+FRH
Page 337 and 338:
MC52i AT Command Set 12.24 AT+FRS
Page 339 and 340:
MC52i AT Command Set 12.26 AT+FTM
Page 341 and 342:
MC52i AT Command Set 12.28 AT+FVRF
Page 343 and 344:
MC52i AT Command Set 13.1 SMS para
Page 345 and 346:
MC52i AT Command Set 13.1 SMS para
Page 347 and 348:
MC52i AT Command Set 13.3 AT+CMGD
Page 349 and 350:
MC52i AT Command Set 13.5 AT+CMGL
Page 351 and 352:
MC52i AT Command Set 13.6 AT+CMGR
Page 353 and 354:
MC52i AT Command Set 13.7 AT+CMGS
Page 355 and 356:
MC52i AT Command Set 13.8 AT+CMGW
Page 357 and 358:
MC52i AT Command Set 13.9 AT+CMSS
Page 359 and 360:
MC52i AT Command Set 13.11 AT+CNMI
Page 361 and 362:
MC52i AT Command Set 13.11 AT+CNMI
Page 363 and 364:
MC52i AT Command Set 13.12 AT+CPMS
Page 365 and 366:
MC52i AT Command Set 13.14 AT+CSCB
Page 367 and 368:
MC52i AT Command Set 13.16 AT+CSMP
Page 369 and 370:
MC52i AT Command Set 13.17 AT+CSMS
Page 371 and 372:
MC52i AT Command Set 13.18 AT^SLMS
Page 373 and 374:
MC52i AT Command Set 13.20 AT^SMGO
Page 375 and 376:
MC52i AT Command Set 13.21 AT^SMGR
Page 377 and 378:
MC52i AT Command Set 13.23 AT^SSDA
Page 379 and 380:
MC52i AT Command Set 14. SIM relate
Page 381 and 382:
MC52i AT Command Set 14.2 AT^SXSM
Page 383 and 384:
MC52i AT Command Set 14.3 AT^SCKS
Page 385 and 386:
MC52i AT Command Set 14.4 AT^SCID
Page 387 and 388:
MC52i AT Command Set 15. SIM Applic
Page 389 and 390:
MC52i AT Command Set 15.1 Usage of
Page 391 and 392:
MC52i AT Command Set 15.2 Remote-S
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
MC52i AT Command Set 15.4 AT^SSTA
Page 399 and 400:
MC52i AT Command Set 15.5 ^SSTN 15
Page 401 and 402:
MC52i AT Command Set 15.6 AT^SSTGI
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
MC52i AT Command Set 15.10 AT^SSTG
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
MC52i AT Command Set 15.23 AT^SSTR
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
MC52i AT Command Set 16.2 AT+CPBR
Page 455 and 456:
MC52i AT Command Set 16.2 AT+CPBR
Page 457 and 458:
MC52i AT Command Set 16.3 AT+CPBS
Page 459 and 460:
MC52i AT Command Set 16.4 AT+CPBW
Page 461 and 462:
MC52i AT Command Set 16.5 AT^SPBC
Page 463 and 464:
MC52i AT Command Set 16.7 AT^SPBG
Page 465 and 466:
MC52i AT Command Set 16.7 AT^SPBG
Page 467 and 468:
MC52i AT Command Set 16.8 AT^SPBS
Page 469 and 470:
MC52i AT Command Set 16.8 AT^SPBS
Page 471 and 472:
MC52i AT Command Set 16.10 AT^SDLD
Page 473 and 474:
MC52i AT Command Set 17.1 Audio pr
Page 475 and 476:
MC52i AT Command Set 17.4 AT+CLVL
Page 477 and 478:
MC52i AT Command Set 17.6 AT+VTD 1
Page 479 and 480:
MC52i AT Command Set 17.8 AT^SAIC
Page 481 and 482:
MC52i AT Command Set 17.9 AT^SNFA
Page 483 and 484:
MC52i AT Command Set 17.10 AT^SNFD
Page 485 and 486:
MC52i AT Command Set 17.12 AT^SNFM
Page 487 and 488:
MC52i AT Command Set 17.13 AT^SNFO
Page 489 and 490:
MC52i AT Command Set 17.14 AT^SNFP
Page 491 and 492:
MC52i AT Command Set 17.15 AT^SNFS
Page 493 and 494:
MC52i AT Command Set 17.16 AT^SNFT
Page 495 and 496:
MC52i AT Command Set 17.17 AT^SNFV
Page 497 and 498:
MC52i AT Command Set 17.19 AT^SRTC
Page 499 and 500:
MC52i AT Command Set 18. Hardware r
Page 501 and 502:
MC52i AT Command Set 18.2 AT+CALA
Page 503 and 504:
MC52i AT Command Set 18.3 AT^SBC 1
Page 505 and 506:
MC52i AT Command Set 18.3 AT^SBC N
Page 507 and 508:
MC52i AT Command Set 18.5 AT^SCTM
Page 509 and 510:
MC52i AT Command Set 18.5 AT^SCTM
Page 511 and 512:
MC52i AT Command Set 18.6 AT^SSYNC
Page 513 and 514:
MC52i AT Command Set 19.2 ATS3 19.
Page 515 and 516:
MC52i AT Command Set 19.4 ATS5 19.
Page 517 and 518:
MC52i AT Command Set 20.2 Star-Has
Page 519 and 520:
MC52i AT Command Set 20.2 Star-Has
Page 521 and 522:
MC52i AT Command Set 20.3 Availabl
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
MC52i AT Command Set 20.4 Availabi
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
MC52i AT Command Set 20.5 AT Comma
Page 539 and 540:
MC52i AT Command Set 20.6 Factory
Page 541 and 542:
MC52i AT Command Set 20.6 Factory
Page 543 and 544:
MC52i AT Command Set 20.7 Summary
Page 545 and 546:
MC52i AT Command Set 20.8 Alphabet
Page 547 and 548:
Page 549 and 550:
Page 551:
show all

MC52i AT Command Set

Create successful ePaper yourself

Delete template?

Save as template?