MC52i AT Command Set

MC52i AT Command Set
8. Network Service Commands
8. Network Service Commands
The AT Commands described in this chapter are related to various network services. More commands related
to this area can be found in Chapter 9., Supplementary Service Commands.
8.1 AT+COPN Read operator names
The AT+COPN command returns the list of operator names from the ME. Each operator code that
has an alphanumeric equivalent in the ME memory is returned. See also: AT^SPLM.
Syntax
Test Command
AT+COPN=?
Response(s)
OK
ERROR
+CME ERROR:
Exec Command
AT+COPN
Response(s)
+COPN: ,
+COPN: ...
OK
ERROR
+CME ERROR:
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
+ + + + + + - - - GSM 07.07
Parameter Description
(str)
Operator in numeric format; GSM location area identification number.
(str)
Operator in long alphanumeric format; can contain up to 16 characters.
MC52i_ATC_V01.201 Page 166 of 551 4/16/10
Confidential / Released