MC52i AT Command Set

MC52i AT Command Set
11.5 AT+CGEREP
11.5 AT+CGEREP GPRS event reporting
The write command enables or disables sending of unsolicited result codes, "+CGEV" from MT to TE in the case
of certain events occurring in the GPRS MT or the network. controls the processing of unsolicited result
codes specified within this command. controls the effect on buffered codes when 1 or 2 is
entered. If a setting is not supported by the MT, ERROR or +CME ERROR: is returned.
Read command returns the current and buffer settings.
Test command returns the modes and buffer settings supported by the MT as compound values.
Syntax
Test Command
AT+CGEREP=?
Response(s)
+CGEREP: (list of supported s), (list of supported s)
OK
Read Command
AT+CGEREP?
Response(s)
+CGEREP: ,
OK
Write Command
AT+CGEREP=[[, ]]
Response(s)
OK
ERROR
+CME ERROR:
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
+ + + + + + - - - GSM 07.07
Unsolicited Result Codes
URC 1
+CGEV: REJECT ,
A network request for PDP context activation occurred when the MT was unable to report it to the TE with a
+CRING unsolicited result code and was automatically rejected.
URC 2
+CGEV: NW REACT , , []
The network has requested a context reactivation. The that was used to reactivate the context is provided
if known to the MT.
URC 3
+CGEV: NW DEACT , , []
The network has forced a context deactivation. The that was used to activate the context is provided
if known to the MT.
URC 4
+CGEV: ME DEACT , , []
The mobile equipment has forced a context deactivation. The that was used to activate the context is
provided if known to the MT.
MC52i_ATC_V01.201 Page 284 of 551 4/16/10
Confidential / Released