MC52i AT Command Set

MC52i AT Command Set
12.4 AT+FBOR
12.4 AT+FBOR Query data Bit Order
This command queries the bit order for the receive mode. The mode is set by the ME depending on the selected
Service Class, see "AT+FCLASS Fax: Select, read or test service class".
Syntax
Test Command
AT+FBOR=?
Response(s)
(list of supported s)
OK
Read Command
AT+FBOR?
Response(s)
OK
Write Command
AT+FBOR=
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last Reference(s)
- + - + - - - - - EIA PN-2388
Parameter Description
(num)
bit order modes
0 Direct bit order for both Phase C and for Phase B/D data.
[1] Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.
Note
• Used for Fax Class 2 only.
MC52i_ATC_V01.201 Page 317 of 551 4/16/10
Confidential / Released