MC52i AT Command Set

MC52i AT Command Set
10.1 AT^SICS
10.1 AT^SICS Internet Connection Setup Profile
AT^SICS serves to create and edit Internet connection profiles. A connection profile can be assigned to one or
more service profiles defined with AT^SISS, and thus, determines which type of connection is to be established
when opening a service profile with AT^SISO.
The AT^SICS read command requests the current settings of all Internet connection profiles. One line is issued
for every possible parameter of a given "conType" value.
The AT^SICS write command specifies all parameters of a connection profile identified by .
At first the type of Internet connection needs to be selected via value "conType". This determines
the applicability of all other values related to this "conType" and automatically sets their
defaults. An exception is the which can be set before or after selecting "con-
Type".
To change the settings the write command needs to be executed for each single . All profile
parameters set with AT^SICS are volatile.
MC52i supports the authentication methods PAP (Password Authentication Protocol), CHAP (Handshake
Authentication Protocol) or none. The method actually used for an Internet connection via CSD or GPRS is negotiated
at the LCP layer, i.e. it is negotiated with the remote peer at connection setup.
Table 10.1: Applicability of AT^SICS values
value CSD GPRS0
"conType" mandatory mandatory
"user" optional optional
"passwd" optional optional
"apn" ø mandatory
"inactTO" optional optional
"calledNum" mandatory ø
"dataType" mandatory ø
"dns1" optional optional
"dns2" optional optional
"alphabet" optional optional
Syntax
Test Command
AT^SICS=?
Response(s)
OK
Read Command
AT^SICS?
Response(s)
^SICS: , ,
OK
MC52i_ATC_V01.201 Page 226 of 551 4/16/10
Confidential / Released