MC52i AT Command Set

MC52i AT Command Set
15.14 AT^SSTGI
15.14 AT^SSTGI SAT Get Information - Launch Browser (21)
This command shall be used after receiving the URC ^SSTN: 21.
If the SIM Application attempts to start an Internet Browser, it uses this response to inform the TE of the launch
parameters.
The sequence of events is as follows:
1. After the Remote-SAT notification 21 was issued the TE shall ask for the command parameters via
AT^SSTGI=21.
2. The ME shall ask the user for confirmation using the Alpha Identifier/Icon Identifier (user confirmation phase)
if present, when it receives a LAUNCH BROWSER command which requests to connect the existing browser
session to a new URL or to terminate a browser session.
3. If the user confirms to start the browser, AT^SSTR=21,0 shall be responded.
4. If the user denies to start the browser, AT^SSTR=21,34 shall be responded.
5. The SIM Application will end the proactive session.
6. The ME shall request content using the given URL. However, if no URL string is supplied a default URL shall
be used.
7. On response AT^SSTR=21,0 the browser session may still be active while a next proactive command is
issued. Therefore the end of the browser session shall be reported to the ME via browser termination event command
asynchronously if determined by the event list.
For details please refer to AT^SSTR.
Syntax
Write Command
AT^SSTGI=21
Response(s)
^SSTGI: , , ,
, , , , ,
,
OK
ERROR
+CME ERROR:
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
- + + + + + - - -
Parameter Description
(num)
21 Proactive command ID, see Remote-SAT Command Types
(num)
This byte is RFU.
(str)
String for user confirmation stage
(num)
0...255 Used as bit field
bit 1
0: Icon is self explanatory and replaces text
MC52i_ATC_V01.201 Page 411 of 551 4/16/10
Confidential / Released