MC52i AT Command Set

MC52i AT Command Set
15.25 AT^SSTR
15.25 AT^SSTR SAT Response - Set Up Call (16)
The TE is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Command
has been executed.
Syntax
Write Command
AT^SSTR=16,
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
- + + + + + - - -
Parameter Description
(num)
0...255
0 Command performed successfully. Indicate that the user has accepted the call
request.
4 Command performed successfully, but requested icon could not be displayed.
16 Proactive SIM session terminated by user
20 USSD/SS Transact terminated by user
32 ME currently unable to process command
132 ME currently unable to process command because screen is busy
34 User did not accept the proactive command. Indicate that the user has denied
the call request
35 User cleared down call before connection or network release
Note
• After confirmation phase the TE may show a dialling animation on the screen until a mandatory response
parameter is issued.
^SSTR: , ,
MC52i_ATC_V01.201 Page 429 of 551 4/16/10
Confidential / Released